These are 'Decals' otherwise known as Waterslide transfers. In all Options the decals are sold as a pair.
They can be used on the whole range of boats. They can be cut to size or applied 'as is' on the models to replace those which have been worn, damaged or scorched, or to simply and quickly add additional decoration on engines, trailers, accessories or diorama.
Good quality, laser printed, they are easy to apply on new painted metal or on woodwork. They can be applied over the top of old decals.
They are an alternative to self adhesive examples with significant advantages:
- Cheaper.
- Can be applied over the top of old signage without the need to remove the original.
- They can be slid and re positioned more easily.
- They are thinner and do not leave an adhesive residue.
- They can be used to hide rivets or areas of paint damage.
- Less affected by heat.
- Easily replaced.
- Once in place, if lacquered or put in a warm oven for an hour, they will last longer.
These are with a white backing and unlike the clear backed variety are intended for use on dark backgrounds.
All dimensions are shown as Length x Width and refer to the printed area. In all cases they are sold as a pair.
Option 1: Snipe Small x 2. These measure 36 x 10 mm.
Option 2: Snipe Medium x 2. These measure 48 x 14 mm
Option 3: Snipe Large x 2. These each measure 56 x 19 mm.
Option 4: Panther Small x 2. Currently Unavailable.
Option 5: Eagle Small x 2. Currently Unavailable.
Option 6: Comet Small x 2. Currently Unavailable.
Option 7: Bowman (Dereham) Medium x 2. Round decals. These are 35 mm diameter.
Option 8: Two Bowman (Dereham) Small x 2. Round decals. These are 24 mm diameter.
NOTE: Options 7 & 8. Bowman (Dereham) is not the same decal as the Bowman (Luton) because these were completely different companies.
Option 9: Bowman (Luton) x 2. decals measuring 25 x 24 mm square each.
Option 10: Bowman (Luton) x 2. decals measuring 33 x 33 mm square each.
Option 11: Swallow Small x 2. Currently Unavailable.
- Ensure there is no loose paint or rust on the area where the decal is to be applied.
- Wipe the area quickly with methylated spirit to remove grease and soot. If you linger, it will damage the paint!
- Cut off the white surround carefully around the edge of the decal very close to the design. You will need steady hands AND very sharp small scissors especially for the ones with curved edges.
- Immerse in clean distilled or rain water to which a couple of drops of washing up liquid have been added and leave to soak for 3 minutes.
- Position on the desired point on the model. Using a clean finger or a brush slide the decal off the backing paper. If it does not move easily re-immerse and repeat.
- Ensure there are no creases and that the positioning is correct.
- Dab (do not rub) with absorbent kitchen roll to remove excess water.
Nominal, subsidised charge for postage for any number of decals plus generous Multi-buy discounts.
These are stock images and not of the exact item you will receive. Postage combined on more than one purchase. UK sales only.
Any boats, parts or other items pictured are not included in the listing and are for illustration purposes only.
OTHER DECALS AVAILABLE:
Fairground: I have a listing with a further 10 Options of decorative fairground decals at listing 334479190478. Just put this number in the e bay search box.
Miscellaneous: Fred Dibnah, War department and scuttle decals are at listing: 334340700518
Sutcliffe: A range of decals with a further 15 Options of decals as used on sutcliffe boats and oilers at listing 334869425774
DELIVERY UPGRADE.
The delivery of ANY item or group of items bought at the same time can be upgraded to 'next working day 24 hour Delivery' for a single payment £5. To invoke this go to listing 333831804608 (put this number in the e bay search box) then buy 'Special Delivery' for £5.