TinySA | TinySA Ultra | |
Display size | 2.8 inch | 4 inch |
Max low input frequency | 350MHz | 800MHz, 6GHz in Ultra mode |
High input range | 240MHz - 960MHz | Not available |
Resolution filters in 1,3,10 steps | from 3kHz to 600kHz | from 200Hz to 850kHz |
Max low output frequency | 350MHz | Sine wave up to 800MHz, Square wave up to 4.4GHz |
Low output level | -76dBm to -7dBm | -104dBm to -16dBm |
High output frequency range | 240MHz - 960MHz | Not available |
High output level | -32dBm to 16dBm | Not available |
Ultra mode | Not available | Level calibrated up to 6GHz |
Internal LNA gain | Not available | 20dB up to 4GHz |
Internal step attenuator | Normal: 0-31dB, High: NA | 0-31dN |
Displayed points per scan | max 290 | max 450 |
0-350MHz scan time | 405ms | 165ms |
Shortest zero span time | 1.8ms | 17ms |
DANL low input at 100MHz | -146dBm/Hz | -153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On) |
DANL high input at 880MHz | -163dBm/Hz | Not available |
DANL degrading in ultra mode | 10dB above 2.5GHz, 25dB above 5.3GHz | |
Phase noise at 10kHz offset | -83dBc/Hz | -92dBc/Hz |
Phase noise at 100kHz offset | -98dBc/Hz | -108dBc/Hz |
Low input 1dB compression level | -0.5dBm | +0.5dBm (LNA Off) / -26.5dBm (LNA On) |
IIP3 without LNA | +24dBm | +18dBm (at least 2MHz apart) / 0dBm (500Hz apart) |
IIP3 with LNA | Not available | -8dBm (at least 2MHz apart) |
SD card slot | Not available | micro SD card |
Audio out | Not available | 3.5mm headphone plug |
FW update mode activation | Via DFU menu | Push jog button before switch on |
AM modulation depth | Fixed 30% | 10% and 100% |
FM deviation | 4kHz or 75kHz | 1kHz to 300kHz |
Modulation frequency | 50Hz to 5kHz | 50Hz to 5kHz(AM) or 1kHz(FM) |
This New Version V0.4.5.1 Spectrum Analyzer with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function,and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.
Compared with the 2.8 inch tinysa, upgraded TinySA ULTRA has a larger screen size, a wider measurement range, faster and more accurate measurement performance, you can easily cope with measurement test in various fields.
When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.
Built-in calibration signal generator that is used for automatic self test and low input calibration.
|
|
|
---|---|---|
4.0 inch Large TouchscreenWith 4.0 inch 480 x 320 high definition screen, which can let you operate and see the data more clearly, give you a better using experience. |
Built-in 3000m-ah Rechargeable BatteryUltra-long battery life,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently. |
32GB TF SD card IncludedBuilt-in 32Gb mi-cro SD card, can directly record data to the card ,which is convenient for your data sharing and storage. |
Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.