Product Description
Product parameters:
1. Packing weight: about 1.35kg Packing size: 36*22*4cm
2. The shrinkage length is about 34.5cm, and the erection length is about 410cm
3. Frequency: can work in 8 bands (7mhz-50mhz) at 40.30.20 17.15.12.10.6 meters.
4. Impedance: 50 (Ω)
5. Rolling power: 100w
6. Longitudinal wave: 40m swr band <1.3, other bands can be adjusted to 1.1
Slider reference data:
Close to the aluminum tube for 4 turns of 7mb, the pull rod retracts about 10cm, and the foot wave is 1.1-1.3
The position of the 14mb slider is close to the side of the rod antenna 6 turns and pulls back about 20cm. Foot wave 1.1-1.3
21.4 Aluminum tube and 4 pole antenna, 7-10cm, vertical wave 1.1-1.3
29.6 As long as the antenna is pulled out from the pole, everyone pulls back about half a section, the standing wave is 1.2
Precautions:
1 Put the ground grid connection ring directly on the screw of the ground anchor and screw it into the base. Then there are the link base - four aluminum tubes - loading coil - rod antenna.
2. In the case of standing wave adjustment, if there is a talent analyzer, first find the lowest point of the standing wave to see whether the resonance frequency is high or low. If the resonant frequency is high, it means that the antenna is short. To lengthen the rod antenna or increase the number of turns of the loading coil, if the resonance frequency is low, shorten the antenna of the rod antenna or reduce the number of turns of the loading coil.
If there is no talent meter, use the standing wave meter that comes with the radio, set it to FM, AM or RTTY mode, reduce the transmit power to about 10 watts, press the transmit button, adjust the radio frequency knob, and search for each frequency band. The minimum point of standing wave, look at the level of resonance frequency, and then use the above method to adjust
3. When using the ground net, tear 3-4 pieces. The antenna impedance can be changed by adjusting the angle of the ground grid.
Package included:
1 x Aluminum Alloy Base (anodized to black)
1 x Multi-band Load Coil (40m - 10m; material: nylon. Note: Load coil is processed by opening mold instead of manual manufacturing)
1 x Ground Anchor 10 x 240 mm (not plated to maintain good grounding)
4 x Alumina Tubes Black 19 x 320 mm (anode sandblasting oxidation)
1 x 2.5 m Stainless Steel Telescopic Antenna (thickness can be customized)
1 x 10-strand Ground Wire Cable (tear as needed when using; generally tear 3 strands)
1 x Cloth Bag
About Item
All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.
Customer Satisfactory
1.We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
2.I am here and ready to assist you with any questions or concerns you might have before or after the purchase.
3.My goal is to make sure you are a happy customer and pleasant shopping with us.
Feedback
If you are satisfied with the purchase and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5.
Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left.
If you plan to give us a neutral/negative feedback Or open ebay/paypal case, please write to us immediately so that we can do our best to resolve your problem.
We stand behind everything that we sell and will do everything possible to assure you are satisfied.
When you receive your purchase if you are not 100% satisfied, please sent me ebay message and we will do our best to make you happy. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.
Buyers are responsible for the postal cost of returning the items.
We must be notified of the intent to return your item within 30 days of receiving the item.
Items returned must be in the same condition that they were received.
How to return
1,Please ask us for return address .
2,Shipping back the package .
The RMA#(Return Merchant Authorization Number = Your ebay ID) must be clearly written on the return package ,Otherwise the package will be refused.
3,Sent us the return tracking number.
4,All returns will be inspected prior to a credit being issued.
1:Returns are accepted within 60 days of purchase.
2:All returned items MUST BE in the original packaging.
3:We will be happy to assist you if if any item needs to be returned or replaced
4:Please don't open a return request before contacting us first to solve, many thanks.
We strive to answer all questions and resolve any problems as quickly as possible.
Business Hours: Monday-Saturday 9:00-17:00