NOT AN AVERAGE BATTERY TESTER, BT506 IS SMALLER & SMARTER.

Autel MaxiBAS BT506 is a battery and electrical system analysis tool that uses Adaptive Conductance, an advanced battery analysis method to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, which is vital to determine a battery’s true health. MaxiBAS BT506 enables technicians to view the health status of the vehicle's battery and electrical system. Download the free and easy-to-use Battery Test mobile app that is available for iOS and Android devices. Together with the BT506, this app can complete battery & starting and charging system tests and display the test results.

Highlights of Autel BT506:

Support in-vehicle and out-of-vehicle testing

Test 6- and 12-volt batteries: 100 - 2000 CCA

Test 12- and 24- cranking/charging systems

Test Flooded, AGM, AGM Spiral, EFB and GEL batteries

Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA

Creative Adaptive Conductance for 95% accuracy

Display test records in list form, offering a summary review tested and vehicles and/or batteries

PDF repair report for easy viewing, sharing, printing

Permanently valid FREE software updates

Purchase the Autel VCI V200P to upgrade the BT506 to the BT508 to get battery reset, battery change, and full system fault scan functions for one vehicle brand.

Autel MaxiBAS BT506 can works with 95% Autel diagnostic tablet for detailed vehicle battery, cranking, startor and generator tests, such as: Autel MK808BT, MP808BT, MS906BT, MK906BT, MS906TS, MS906 Pro, MS906 Pro-TS, MK906 Pro-TS, MK908, MK908P, MS908S Pro, Elite, Elite 2, MS909, MS919, Ultra Lite, Ultra.

WHAT IS ADAPTIVE CONDUCTANCE?

Autel battery tester MaxiBAS family uses Adaptive Conductance [Valued 1000USD Technology] to gauge a battery’s conductance health. A low frequency alternating current is sent through the battery to determine its remaining plate area. This method’s advantage over ordinary load testers is its ability to allow multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.

Put it in simple words, that will be:

Detect low-capacity batteries, 100% detection rate of bad batteries

Reduce Battery Misdiagnosis and retest

Diagnose Low Capacity or Completely Discharged Batteries

Reduce battery Misdiagnosis, Diagnosis accuracy rate over 95%

AUTEL MAXIBAS BT506, POWERFUL BEYOND IMAGINATION

UNIVERSAL BATTERY TEST

Autel MaxiBAS BT506 digital battery load test tool supports in-vehicle and out-of vehicle testing of 6- and 12-volt, 100 -2000 CCA, Flooded, AGM, AGM Spiral, EFB and GEL batteries, and compatible with major battery test standards CCA, CA, SAE, EN, IEC, DIN, JIS and MCA. It can test almost all the transportation tools batteries such as car, boat, motorcycle or any other.

The battery test results include a color-coded results summary, a list of test data, and repair tips.

STARTER TEST

Autel MaxiBAS BT506 can check the working condition of the vehicle starter, it helps you test and analyze the actual required starting current and starting voltage to check the if the starter works properly or not.

GENERATOR TEST

With the Autel battery scan tool BT506, you can check and analyze the charging system status, thus to find out whether the output voltage of the generator is normal, whether the diode works properly or not, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.

USER-ORIENTED EASIEST OPERATION

ON-SCREEN INSTRUCTIONS

New to the battery tester? No worries at all! Autel BT506 provides detailed and step to step instructions, just follow the on-screen indicators, you can finish battery diagnosis easily.

AUTOMATICALLY IDENTIFY BATTERY TYPE

Clamp the BT506 to a in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.

POLARITY PROTECTION

Metal clamps of the BT506 are protected by short-circuit protection, no worries even you reverse the positive and negative poles.

EASY REPAIR REPORT SHARING

The Battery Test app can save a history of repair reports from your diagnostic sessions. Repair report in PDF can also be generated for the easy viewing, sharing, and printing of these reports.

MORE TO EXPLORATION

UPGRADEABLE TO BT508

Want more functions? Purchase the Autel VCI V200P to upgrade the BT506 to the BT508 so it will be able to perform battery reset, battery change, and full system fault scan for one vehicle brand

GREAT ADDITION TO AUTEL NEWEST SCANNERS

Already have an Autel scanner at your hands? Autel BT506will be a great addition for detailed vehicle battery health diagnostics. It is compatible with the newest models such as Autel Maxisys MS906 Pro, MS906 Pro-TS, MS Elite 2 to perform complete battery, cranking, charging systems check.

LIFETIME FREE UPDATES

Check regularly to see if there is latest firmware updates, you can download the free software updates valid for a lifetime to keep your BT506 scanner up to date.

Specification

Connectivity: USB 2.0, Type C
V3.0 BR/EDR+ V4.2 LE Dual-Mode
Input Voltage: 5V DC
Working Current: < 150 mA at 12V DC
Internal Battery: N/A
CCA Range: 100 to 2000A
Voltage Range:1.5 to 16V
Working Temperature:  -10°to 50° C (14° to 122° F)
Storage Temperature: -20° to 60° C (-4° to 140° F)
Dimension (L x W x H) : 107 mm (4.21“) x 75 mm (2.95”) x 26 mm (1.02”) (clamp   cable not included)
Weight: 320 g (0.7 lb.)