Up for Auction is another Tiger Nick Golf Club Solutions Masterpiece
Like Us on Facebook, Follow Us on Twitter & Instagram to get all the latest updates
ONE OF A KIND
(Matching Serial Numbers)
PING EYE 2
ORANGE DOT
STAINLESS STEEL
3 -- PW
(FLAWLESS... YOU WILL NOT FIND A NICER SET OF PING IRONS)
THE QUALITY AND ATTENTION TO DETAIL IS STUNNING AND THE PICTURES DO NOT DO THEM JUSTICE.
Spine Aligned
True Temper Dynalite Gold XP S300 Stiff Flex Shafts
Brand New Black Golf Pride Tour Velvet Grips
Standard Loft -- Lie 2 Degrees Flat -- Length Standard
The head of these Gorgeous Irons are in 99% FLAWLESS MINT condition....
(please note: with any refinished club there may be some flaws that we can not remove)
They have NOT touched a golf ball since being refinished
This Super Rare One-of-a-Kind Irons are being offered for a limited time and there will only be a few wedges of each style made.
Intelligent Design Series Treatment
So... What is spine aligning?
First, every golf shaft has a "spine", and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is "downline" with the direction of the golf shaft (so the spine would be in the 3 o'clock or 9 o'clock position - also called the neutral position.)
Indeed it does seem to make sense that if the stiffer spine is in the 1 o'clock position within the shaft (or 2 o'clock, or 5 o'clock, or 7 o'clock, or 11 o'clock, etc.), then it is highly likely the shaft won't perform as well as if the spine is in that downline 3 o'clock or 9 o'clock neutral position.
It is interesting to clamp down a properly spine aligned club into a club vice, and pull down hard on the head, and release it. The clubhead moves rapidly back and forth in a reasonably straight path. Then try it with a club that is NOT properly spine aligned. The difference is amazing.... the shaft/clubhead bounces all over the place, in about 50 different directions. The shafted club with the properly aligned spine position moves in a much straighter path.
We're not aware of any hard data that proves the validity or significance of spine aligned clubs. However, for sure, many of the top clubmakers, many shaft experts, and many really excellent golfers are convinced that the location of the shaft's spine in the golf club will have an affect on the overall performance of the club; including having an affect on shot dispersion and accuracy; having an affect on results from mishits; and most definitely will affect the feel of the club.
Our wedges are specifically designed for the more aggressive player who likes to go flag-hunting
An American company and PROUD of it!
1) We start by checking the lie and loft (except older Ping irons) because if they are to far off, it might effect on the swing weight if I have to bend them after they are done.
2) We then pull the shafts out and clean the hosel & check the depth of the hosel to make sure they are consistent to receive the shaft.
3) We prep all the shaft tips and put the shafts in the spine finder and mark them after removing all grip tape and thoroughly cleaning them.
4) We Strip the old chrome and nickel plating (on chrome plated club heads)
5) We check the groove depth and if needed re-groove -- sand/polish the nicks, dings & bag chatter marks being as careful as possible not to remove any excess head weight
6) Next the heads are sent to be either chrome plated or black Nitride.
7) Once the heads get back... dry fit the shafts checking the length & swing-weight -- then after installing the lead plug weights double check the swing-weight and install the ferrules.
8) Mix the professional epoxy (cure rate 24 hours) and glue them making sure the spine position is in the correct spot and make sure they have the same amount of glue to maintain a consistent swing weight. Let the glue dry at least 24 hrs.
9) Weight sort the grips to make sure all 8 grips are the same weight -- install the grips and make sure they line up straight and consistently stretch (on cord is critical for sizing).
10) Finally we turn the ferrules and shine them up w/acetone. Double check the loft and lie. A final cleaning & DONE!
Each club is hand built using the ten step process above.
This ensures your clubs will get the best matched specs and they will play more consistently club to club
This is a rare opportunity to purchase a custom assembled player's set.
These are simply one of the best if not the best irons ever made. You will improve while playing it and the feedback is unmatched.
Anything Ping Golf is top-notch, and this stands out as one of their best products ever offered.
In order to bid with confidence you need to know a little about me.
First, I am a golfer… so I understand the importance of top quality golf equipment. Also, before you bid, Please check my feedback. Look closely at the comments my past customers have made. An eBay seller doesn't get this many great (over 5000) positive comments unless I’m taking care of my customers.
I maintain this nearly 100% feedback by following four simple rules:
1. Describe the merchandise honestly.
2. Communicate with the customer.
3. Keep them informed.
4. Ship promptly
PLEASE CHECK OUT THE PHOTO'S!!!!!!!!!!!!
Feel free to look at all my feedback!
Thanks for looking & have a GREAT DAY!
I will ship within 1 day of cleared payment.
Shipping is Only $29.99
(Continental Unites States)
Delivery Conformation and Insurance are included
I accept and prefer PayPal
International Buyers Please Read:
To see more great clubs... just check View seller's other items
Please do your due diligence.
I will answer any and all questions
Return Policy:
Item condition: The condition of the returned item that would be acceptable are:
The Item or Items must be unused and unaltered.
Time Limit: Returns accepted within 14 days after the item is delivered
Return Shipping: The buyer pays all cost of shipping for returned items
Restocking fee: There will be a 15% restocking fee of total price paid