DMM Kinisi Max Arborist Harness

Pioneering design born from experience. The Kinisi is a modular and hard wearing sit harness, ideal for use across a range of tree care, aerial and rescue applications. No shortage of experience and heritage has gone into creating the design. Treemagineers have been at the forefront of professional product development for nearly 20 years, and DMM has been with them on every step of this journey. For the Kinisi, Treemagineers have pushed harness design to a new high. To bring the design to life and maintain only the best build quality, DMM have evolved from supplying hardware to producing the complete harness at our new production facility here in North Wales. Features The patented rope bridge adjuster provides easy configuration for comfort and optimised positioning. The rear restraint point on the back of the harness is easy to locate and doubles as a secure attachment point for a chainsaw lanyard. The two side rings provide work positioning attachment points. Two forward Ds provide suspension attachment points and can be positioned to suit your centre of gravity for comfort and manoeuvrability. Sliding aluminium buckles allow for smooth and hardwearing adjustment. Moveable webbing stoppers to let you run personalised webbing lengths without compromising safety. Additional features Maximum comfort and support. Webbing is woven through a supporting material and then padded with foam, providing comfort by spreading the user's weight over a large surface area. This structural webbing is then slimmed down where bulk would inhibit movement. Designed to last. All hardware is optimised to be textile friendly and reduce webbing wear. Replaceable components for enhanced lifespan. Users have the option to replace the pads, elastic keeper loops, leg elastics and loops, rear elastics, riser webbing, bridges, and bridge hardware. Independently evaluated to the performance requirements of the following international standards: ASNZ 1891 – Pass ANSI/ASSP - Z359.12-2019 – Pass CAN/CSA - Z259.12 – Pass ASTM F0887-20 – Pass except the structural webbing is under 44.5mm and the harness has a rear attachment point. CSA Z259.1-05 PD saddle – Pass except the structural webbing is under 41mm. Vast customisation options Customisable rope and webbing bridges. Available in a variety of different terminations and lengths. Removeable webbing stoppers. Webbing lengths can be shortened to the user's requirements. Bosun Chair compatible. Eyelets on the forward Ds can be combined with the Bosun Chair kit. Attachment slots for non-PPE upper assemblies. DMM component compatibility DMM harness accessories. Pre-cut holes allow use of XSRE carabiners, Stowaways, and the Caiman. Multiple storage solutions. Gear brackets allow use of the Vault range and Parking Lot. Harness attachments for restraint according to EN358. Rear restraint point can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO. Harness attachments for work positioning according to EN358. Side rings can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO. Harness attachments for suspension and work positioning according to EN813. Forward Ds are compatible with DMM connectors. Rope bridges work with a range of hardware including Anchor Rings, Ultra O, Axis Swivels or the Rigger Pulley. Webbing bridges work with Anchor Rings, AmericanO, Compact Shackle, and Axis Swivels. SIZE GUIDE SIZE WEIGHT HIP DIMS (inch) HIP DIMS (cm) LEG DIMS (inch) LEG DIMS (cm) MAX USER WEIGHT ROPE BRIDGE DIAM (cm) SMALL 2400g 25 - 33 65 - 83 17 - 23 44 - 59 150kg 10 MEDIUM 2800g 31 - 40 75 - 102 18 - 25 47 - 63 150kg 10 LARGE 3000g 35 - 48 88 - 123 20 - 29 51 - 73 150kg 10 CE EN358:2018 CE EN 813:2008

DMM Kinisi Max Arborist Harness

Pioneering design born from experience.

The Kinisi is a modular and hard wearing sit harness, ideal for use across a range of tree care, aerial and rescue applications.

No shortage of experience and heritage has gone into creating the design. Treemagineers have been at the forefront of professional product development for nearly 20 years, and DMM has been with them on every step of this journey. For the Kinisi, Treemagineers have pushed harness design to a new high.

To bring the design to life and maintain only the best build quality, DMM have evolved from supplying hardware to producing the complete harness at our new production facility here in North Wales.

Features

The patented rope bridge adjuster provides easy configuration for comfort and optimised positioning.

The rear restraint point on the back of the harness is easy to locate and doubles as a secure attachment point for a chainsaw lanyard.

The two side rings provide work positioning attachment points.

Two forward Ds provide suspension attachment points and can be positioned to suit your centre of gravity for comfort and manoeuvrability.

Sliding aluminium buckles allow for smooth and hardwearing adjustment.

Moveable webbing stoppers to let you run personalised webbing lengths without compromising safety.

Additional features

Maximum comfort and support. Webbing is woven through a supporting material and then padded with foam, providing comfort by spreading the user's weight over a large surface area. This structural webbing is then slimmed down where bulk would inhibit movement.

Designed to last. All hardware is optimised to be textile friendly and reduce webbing wear.

Replaceable components for enhanced lifespan. Users have the option to replace the pads, elastic keeper loops, leg elastics and loops, rear elastics, riser webbing, bridges, and bridge hardware.

Independently evaluated to the performance requirements of the following international standards:

ASNZ 1891 – Pass
ANSI/ASSP - Z359.12-2019 – Pass
CAN/CSA - Z259.12 – Pass
ASTM F0887-20 – Pass except the structural webbing is under 44.5mm and the harness has a rear attachment point.
CSA Z259.1-05 PD saddle – Pass except the structural webbing is under 41mm.
Vast customisation options

Customisable rope and webbing bridges. Available in a variety of different terminations and lengths.

Removeable webbing stoppers. Webbing lengths can be shortened to the user's requirements.

Bosun Chair compatible. Eyelets on the forward Ds can be combined with the Bosun Chair kit.

Attachment slots for non-PPE upper assemblies.

DMM component compatibility

DMM harness accessories. Pre-cut holes allow use of XSRE carabiners, Stowaways, and the Caiman.

Multiple storage solutions. Gear brackets allow use of the Vault range and Parking Lot.

Harness attachments for restraint according to EN358. Rear restraint point can be uséd with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.

Harness attachments for work positioning according to EN358. Side rings can be uséd with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.

Harness attachments for suspension and work positioning according to EN813. Forward Ds are compatible with DMM connectors. Rope bridges work with a range of hardware including Anchor Rings, Ultra O, Axis Swivels or the Rigger Pulley. Webbing bridges work with Anchor Rings, AmericanO, Compact Shackle, and Axis Swivels.

SIZE GUIDE

SIZE	WEIGHT	HIP DIMS (inch)	HIP DIMS (cm)	LEG DIMS (inch)	LEG DIMS (cm)	MAX USER WEIGHT	ROPE BRIDGE DIAM (cm)
SMALL	2400g	25 - 33	65 - 83	17 - 23	44 - 59	150kg	10
MEDIUM	2800g	31 - 40	75 - 102	18 - 25	47 - 63	150kg	10
LARGE	3000g	35 - 48	88 - 123	20 - 29	51 - 73	150kg	10