Battery and charger excluded
Produktparameter:
Größe: 46 cm * 9 cm * 21 cm (18,1 * 3,5 * 8,3 Zoll)
Gewicht: 1,6 kg
Schnittdurchmesser: 20cm
Ausgangsleistung: 800w
Nennspannung: 18v
Führungsplattengröße: 10,4 Zoll
Ladezeit: ca. zwei Stunden
Material: ABS + Stahl
Merkmale:
1. Bewegliche Schallwand, um das Spritzen von Holzspänen zu verhindern
Aus hochfestem ABS-Material, verdicktes und verbreitertes Design, blockiert effektiv das Spritzen von Sägemehl beim Sägen von Holz und schützt die menschlichen Hände
2. Einteilige Führungsplatte
Schnelle Wärmeableitung, Verschleißfestigkeit und Fallfestigkeit
3. Komfortabler Griff
Angenehm zu halten, nicht leicht zu tragen
4. Gabelholz rote Kette
Kann auf Ästen geklebt werden, Schnittleistung ist höher
Installationshinweise:
1. Richten Sie die Kette aus und installieren Sie sie
2. Das kleine Ende der Kette ist vorne und das große Ende hinten. Installieren Sie die Kette von der Oberseite der Führungsplatte bis zur Nut der Führungsplatte.
3. Schieben Sie das Führungsblech_obere Gleitloch an der Maschinenschraube nach oben und installieren Sie dann das hintere Ende der Kette am Lagerende der Maschine
4. Die Installation ist abgeschlossen
Packliste:
Maschine + kleiner Schraubenschlüssel + Schutzblech + Kunststoffbox + Führungskette
Hinweis: Akku und Ladegerät sind ausgenommen, Sie müssen den Makita-Akku mit maximal 21 V selbst vorbereiten.
-------------------
Product parameters:
Size: 46cm *9cm *21cm (18.1*3.5*8.3in)
Weight: 1.6kg
Cutting diameter: 20cm
Output power: 800w
Rated voltage: 18v
Guide plate size:10.4 inches
Charging time: about two hours
Material: ABS+steel
Features:
1. Movable baffle to prevent wood chips from splashing
Made of high-strength ABS material, thickened and widened design, effectively block the sawdust splashing when sawing wood, and protect human hands
2. One-piece guide plate
Fast heat dissipation, wear resistance and drop resistance
3. Comfortable handle
Comfortable to hold, not easy to wear
4. Fork wood red chain
Can be stuck on branches, cutting efficiency is higher
Installation Notes:
1. Straighten out the chain and install it
2. The small end of the chain is in front and the big end is in the back. Install the chain from the top of the guide plate to the groove of the guide plate.
3. Push the guide plate_upper sliding hole on the machine screw to the top, and then install the back end of the chain on the bearing end of the machine
4. Installation is complete
Packing list:
Machine + small wrench + protective baffle + plastic box + guide chain
Note:
Battery and Charger are Excluded ,need to prepare 21V max Makita battery by yourself.