COOL DEAL
VIDEO RECORDER LCD NOT INCLUDED
NOTE: THIS IS THE HIGHEST RES/QUALITY DAY-NIGHT IR SENSITIVE BULLET CAMERA ON THE MARKET WITH 2.5MM PLUG & SHARES POWER FROM MOST DVR'S USING THE 3 RING TIP 2.5MM.
MUCH BETTER QUALITY THAN THE ER16 ER-16 & ER18 ER-18
YOU MUST CONNECT THIS CAMERA TO A MINI DVR THAT CAN RECORD VIDEO & OUTPUT 5V DC POWER.
THIS CAM HAS BEEN FULLY TESTED WITH THE PV1000, PV-1000, PV500, PV-500, PV-500EVC-ECO
PV600, PV-600, PV700, PV-700, PV-800, PV800, PV-806, PV806
YOU CAN ALSO USE THIS WITH THE DV-500 DV500, DV800, & MANY OTHER DVRS SOLD WORLD WIDE.
IF YOU ARE UNSURE THAT THIS WILL WORK FOR YOU, YOU CAN EMAIL US THE MODEL NUMBER & PICTURE OF YOUR DVR SHOWING THE CABLES THAT WERE SUPPLIED WITH IT & THE INPUT JACK SIZE.
BRAND NEW TESTED BULLET CAMERA WITH MICROPHONE & GOLD PLATED REINFORCED 2.5MM RIGHT ANGLE AUDIO VIDEO POWER CONNECTOR.
MOUNT IT ANYWHERE, TAKES UP HARDLY ANY SPACE!
PAL IS BY SPECIAL ORDER ONLY & CAN TAKE UP TO 3 WEEKS TO ARRIVE TO YOU.
NTSC FORMAT IN STOCK NOW.
READY TO USE WORLDWIDE EVEN IF YOU ORDER THE NTSC VERSION TO USE ON YOUR DVR
BECAUSE WHEN YOU PUT A MEMORY CARD INTO A COMPUTER TO DOWNLOAD VIDEO, PAL & NTSC DOES NOT MATTER.
PAL ONLY ONLY MATTERS WHEN YOU OUTPUT YOUR DVR TO A
TV SET/MONITOR.
THIS SONY CCD CAMERA WITH EXVIEW .05 LUX & IR SENSITIVE TO ANY NM LEDS FROM 840- 940NM INVISIBLE GLOW LEDS.
THIS LITTLE MICRO CAM OUTPUTS 550-TV LINES OF RESOLUTION WITH HIGH GAIN MIC, & REQUIRES 5 VOLT DC TO POWER IT, WHICH IS COMMON FOR MOST DVRS THAT SUPPLY POWER TO A EXTERNAL CAMERA & MIC.
5V DC 200MA DRAW.
3.6MM LENS PREINSTALLED OR ASK US TO INSTALL A 4.3MM,6,8,12, OR 16MM AT NO EXTRA CHARGE:
LCD MONITOR SHOWN BELOW NOT INCLUDED:
20MM BULLET TUBE CAM WITH MACRO FOCUSABLE LENS HEAD USE YOUR PV500EVO ECO OR MINI LCD DISPLAY SCREEN TO
EASILY CHANGE THE LENS TO GET ANY VIEW.
CLIP ON MIC ALSO INCLUDED ON THE CAMERA CABLE.
1- Soft Mount Headband/ REMOVABLE Velcro Nylon Sleeve Holster
flast surface adhesive mount with up/down adjustment
1-Mini Soft Mount Quick Clip Locking Position Adhesive Grip Holder adheres to any flat surface quickly & also with a very secure hold/grip.
1-BLACK Hard
Mount TEMPERED PLASTIC "WONT BREAK" THE PERFECT PINCH ANACONDA TYPE
DEATH GRIP PUSH INSERT SNAP CLAMP TUBE CAM HOLDER IN THE WHOLE WORLD" +
nut/bolt will mount to your hat (top or bottom)Helmet Fin/Side, For the
best hold you will EVER FIND!
YOU WILL GET THE 15-19MM CLIP
1 & 3/4 INCH tall HARD MOUNT Omni pan tilt swivel mount base with screws, or you can use reclosable tape/velcro for the bottom round base & mount to any flat surface & will allow adjustable pan/tilt view in seconds, the securely lock down the wing nut.
NOTE: THE PINCH u SNAP CLIP WILL THREAD ON TO THIS OMNI PAN TILT MOUNT ALLOWING TOP OR BOTTOM MOUNTING OF THE BULLET CAM.
2 Zip Tie adhesive Flat Bottom FRONT/BACK mounts for anywhere quick mounting.