This complete Double Din Radio Replacement Kit by Connects2. CTKHD01, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, steering stalk controls, and aerial connections.

Connects2 CTKHD01 Includes:

• Double Din Fascia Adaptor (Black)
• Steering wheel Control Adaptor
• Aerial Adaptors
• Pioneer Stereo Patch Lead

Features:

• Contains universal patchlead CTMULTILEAD.2

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Honda Civic	2006 - 2011	Right Hand Drive Vehicles. Not Suitable for Vehicles with the Factory Sat Nav Unit

PLEASE NOTE:

When installing your new double din stereo DO NOT USE DOUBLE DIN CAGE OR TRIM supplied with the stereo.
The new stereo will mount using the double din side plates within the kit.
The stereo will mount from behind the fascia and is held in place by these side brackets supplied.
No modification is required to the fascia, so please do not attempt to cut the front of the fascia to try and fit the cage supplied with the stereo.

FOR THIS DASH TYPE

PATCH LEAD This interface connects PIONEER stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 

China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.

We do not take any responsibility for China units not fitting as they are not industry standard size.