Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

This interface connects a PIONEER stereo with a jack plug input (on the back of the unit) to the existing dynamicsounds00 Stalk/steering wheel controls of the vehicle.

Compatibility:

Car Make / Model	Year	Radio
Renault Clio	2005 - 2009	(III, R)
Renault Kangoo	2008 - 2019	(II, W)
Renault Laguna	2005 - 2009	(II) III, G)
Renault Master	2010 - 2014	(III)
Renault Megane	2005 - 2008	(II)
Renault Modus	2004 - 2012
Renault Scenic	2005 - 2009	(JM/JZ)
Renault Trafic	2006 - 2010	(II)
Renault Twingo	2007 - 2009	(II)

Headunit: VDO Update List
Connection: 8 Way ISO

Note: Your vehicle should have a Update List stereo and a separate display, then this is the correct lead.

If you have a Tuner List stereo and a separate display then you require the DS-RN003
If you have a Tuner List / Update List stereo with display built into stereo then you require the  DS-RN004

NOTE: PLEASE TAKE NOTE OF YELLOW PLUG AS IT HAS 6 POSITIONS WITH ONE EMPTY SPACE IN THE MIDDLE SO ONLY 5 POSITIONS USED. IF YOU HAVE THIS LAYOUT THEN THIS WILL BE CORRECT FOR YOU.

IMPORTANT NOTES:

If you have a dashboard mounted audio display then this will not work once the new stereo is fitted but your clock and temperature will remain.  

SWC.2 Interfaces C2 Programming tool (C2 RE Flasher) and Programming leads (PROG LEAD 1) are sold separately.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.