|
(1) Hybrid Turbo Charger:
- .57 compressor wheel trim mapped for low & high boost setups
- Oil fitting gaskets & mounting studs included
- Capable of producing over 450 horsepower
- Wet float bearings & properly balanced
- 3" inlet diameter with a 2" outlet
- .50 A/R compressor housing
- .63 A/R turbine housing
- 1/8 NPT oil inlet
- T3/T4 hybrid
|
|
|
(1) Front Mount Intercooler:
- Large design cools down the turbocharged air efficiently
- Strong TIG welds will support high PSI levels
- Lightweight aluminum racing intercooler
- Extra thick core provides ample cooling
- 2.5" cold outlet & 2.5" hot inlet
- Less then 2% pressure drop
|
|
|
(1) Blow Off Valve:
- Protects turbo by venting when shifting and/or reducing throttle
- Performance design produces a powerful & aggressive sound
- Quality design will not leak under high boost conditions
- Flanges installed at user discretion
- Includes complete install kit
|
|
|
(1)
Slim Cooling Fan:
- Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
- Slim design provides excellent engine bay clearance
- Includes the mounting tabs for a easy zip tie install
- Reversible design can either pull or push air
- Versatility of a push/pull reversible fan
- Superior flow of a curved-blade design
- Creates additional aftermarket cooling
- 1.25" thick outside perimeter
- 2.50" thick inside perimeter
|
|
|
(1) Fuel Pressure Regulator:
- Great to setup fuel pressure for boosted engines
- Includes complete install kit
- Precision pressure gauge
- Fully adjustable
|
|
|
(1) Catch Can:
- Stops excess oil from blowing to the intake manifold
- Ensures better mileage & better performance
- Removes oil vapors from breather line
- Show like high quality polish
- Includes complete install kit
|
|
|
(1) 10 Meters Heat Wrap:
- Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
- Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
- Control additional engine bay heat and prevent overheating.
- Keep intercooled air cooled.
- Made of very high temp fiberglass.
|
|
|
(1) Radiator Hose Sleeving Kit:
- Stainless braiding makes rubber radiator hoses up to 5x stronger
- Makes engine bay look of show car quality
- Strong construction provides years of reliability
- Anodized ends for the authentic race like finish
|
|
|
(1) Universal Intercooler Piping Kit:
- Lightweight yet strong aluminum piping
- May necessitate light modification to fit
- (8) stainless steel worm gear clamps
- (1) 2.5” 90 degree silicone couplers
- (3) 2.5” straight silicone couplers
- (1) 90 degree 2.5” bends
- (1) 60 degree 2.5” bends
- (1) 45 degree 2.5” bends
- (1) straight 2.5” pipes
|
|
|
(1) Non-divided T3 Flange
- Water jet cut for precision flow
- Mild steel for easy welding to an adapter pipe or direct to stock manifold
|
|
|
(1) Turbo Ram Inlet
- Increases airflow into the turbo system
- Replaces the filter for track performance
- Acts as a Ram Air
- Ultra lightweight and strong aluminum
|
|
|
(1) Tachometer w/ Shift Light
- 5" sized
- White face, back lit
- 11k RPM max
- Programmable shift light for perfect shifts
|
|
|
(1) Oil Pressure Gauge
- White face, back lit
- 0-100psi range
- Mounting hardware and wiring included.
|
|
|
(1) Water Temp Gauge
- White face, back lit
- Small, lightweight design for an easy install anywhere
- Mounting hardware and wiring included.
|
|
|
(1) Oil Temperature Gauge
- White face, back lit
- Small, lightweight design for an easy install anywhere
- Mounting hardware and wiring included.
|
|
|
(1) Boost/Vacuum Gauge
- White face, back lit
- 30in/hg vacuum, 30psi boost pressure
- Mounting hardware and wiring included.
|
|
|
(1) Volt Gauge
- White Face, back lit
- 8v to 16v range
- Mounting hardware and wiring included.
|
|
|
(1) Dash Gauge Pod
- Mounts on dash or center console
- Angles 2 gauges perfectly to the driver
- Lightweight plastic, hollow backing for gauge wire tucking
- Textured finish, for an OEM look.
|
|