Underfloor Heating Insulation Boards
Underfloor Heating Insulation For Under Tile and stone Floors
Living Heat hard insulation boards (600 x 600 x 20mm) under tile and stone hard thermal insulation boards, are designed for use directly under tiles and stone floors. When used under underfloor heating the board greatly increases the response rate and overall efficiency of all underfloor heating systems. These boards are especially effective when installed over a concrete subfloor.
Higher Efficiency = Lower Cost
They have been specially designed for use with our underfloor heating systems. The insulation boards provide a high thermal barrier between the sub-floor and also the final floor covering. For example with tiles. This greatly increases the efficiency of the system and reduces any heat loss. These insulation boards are designed for use under tile and stone floors, and can also be used under wooden or laminate floors.
You May Also Require
| Things to know about this product |
|---|
| Suitable for use with electric and water under floor heating systems |
| Suitable for use with tile, stone and wood floors |
| Suitable for use with all standard 1 part flexible tile adhesives and concrete screeds |
| Manufactured in compliance with BS EN ISO 9001:2001 and certified by BBA Certificate 04/4186 |
| Complies with BS EN 13164: 2001 thermal insulation products for buildings |
| Easy and safe to handle |
| Technical Information |
|---|
| Underfloor Heating Insulation Boards 20mm (600 x 600mm) |
| For Use With |
| All types of electric and water under floor heating systems |
| On top of concrete and timber sub-floors |
| Under all ceramic, porcelain, natural slate and stone floors, (except mosaics) |
| Under wood and laminate floors |
| Characteristics Include |
| High thermal insulation capacity, (blocks out the cold) |
| Totally inert, (does not degrade with time or external conditions) |
| Light easy and safe to handle |
| Easy to cut with sharp knife / fine tooth saw |
| Resistant to tile cement, building cement and most other building compounds |
| Water and damp proof |
| High compression ratio. (minimum 30 tonnes, (yes tonnes!) per sqm) |
| Environmentally friendly |
| In Detail | ||
|---|---|---|
| Thermal Conductivity W/mK | 0.029 | Prevents heat loss |
| Thermal Resistance sqmK/W | 0.85 | Blocks out cold |
| Nominal Density Kg/m 3 | 35 | Weight of 1 m 3 |
| Compression strength KPa 25% | 300/400 | A minimum of 30 metric tonnes, (yes tonnes!) can be placed on 1m 2 without damage |
| Water penetration (96 hours) | 0.00 | Waterproof |