Tile Backer Board Metal Fixing Discs
Metal washers for fixing our tile backer board down to a wooden sub-floor.
Tile backer board fixing discs have been specially designed to provide an easy secure way to fix insulation boards to walls and floors. We hold large stocks of washers and tile backer boards so if you are unsure of what you require please do not hesitate to contact a member of our team. Our advice is free and we are here to help.
You May Also Require
Things to know about this product
The washers are easy to use and have been specially designed for use with virtually all types of insulation boards in three specific ways.
1: The discs have a unique design that incorporates a counter sunk mid-section with a raised mid dome to allow the screw head to pull into the board but the outer rim of the disc to remain flush with the board surface. This is to maintain the flat board surface ready for easy unhindered application of the subsequent layers.
2: The discs have a perforated surface to maintain maximum board surface exposure as standard adhesives and plasters are not designed to be fixed to flat plastic or metal surfaces. Perforating the fixing disk allows the adhesive or plaster to adhere to the board surface minimizing the risk of surface De-lamination or damage.
3: The discs are galvanized to protect them from corrosion and minimize any chance of degradation over time.
Technical Information
When using these discs to fix tile backer boards to walls and floors it is recommended to use 15 discs per 1200 x 600mm board. This is a guide only and depending upon the type, thickness, sub-surface and what is to be put onto the board, it is the installer's responsibility to use the correct number of discs to hold the board in place.
Please select the quantities you require from the drop-down menu above. The washers come in packs of 100 with a minimum order of 100.