Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Audi Steering Wheel Control Interface. Maintains BOSE Amplified Systems. Voice Assistant support available with software update (Part Number: SWCREFLASHER)

Included Free CTMULTILEAD.2 Stereo Patch Lead

Features Highlight:

• Phone Button Support
• USB Updateable for latest software version
• Work with CAN-Bus
• Park Brake
• Reverse
• Ignition
• Illumination
• Speed Pulse
• Amp Retention

Compatibility:

Car Make / Model	Year	Radio
Audi A3	2005 - 2012	(8P Model) Concert, Chorus, Symphony (Quadlock Fakra)
Audi A4	2000 - 2013	(8E, B6, B7,) Concert, Chorus, Symphony (Quadlock Fakra)
Audi A6	2004 - 2011	Concert, Chorus, Symphony (Quadlock Fakra)
Audi A6	2004 - 2011	(Quadlock Fakra)
Audi TT	2006 - 2014	(Mk2 Model, Excluding Vehicles With Digital Amplifier) Concert, Chorus, Symphony (Quadlock Fakra)

Note: Maintains Full Bose Amplified Systems

PLEASE NOTE: (THIS BLUE WIRE REQUIRES CONNECTION TO STEREO REMOTE CONTROL WIRE NORMALLY BLUE OR BLUE WITH WHITE STRIPE. THIS WILL POWER ON THE AMPLIFIER AND GIVE SOUND).

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.