Stator For Kawasaki Ninja ZX-12 R 2002 2003

 

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Higher grade of electric components.
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Grommet included
  • All products shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment

 

Kawasaki Ninja ZX-12R -- 2002-2003

OEM part replacement

 

21003-0011
21003-1391

Specifications

 

Dimensions :
Interior diameter : 41 mm
Exterior diameter : 103 mm
Thickness : 21 mm
Length of wires stator to grommet : 45 mm
Length of wires grommet to plug : 800 mm

Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Black/Red To Black/Red = 0.4 ohms +/-20%
Alternator : Black To Ground = O.L on display +/-20%

instructions

 

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

RMSTATOR around the world