TAMIYA 60306 F-4J Phantom II 1:32 Aircraft Model Kit

Description

1/32 Scale Aircraft Assembly Kit
60306
McDonnell F-4 J Phantom II

In May 1958, the McDonnell F4H-1 Phantom II prototype was rolled out of their facility at Lambert Field, St. Louis, Missouri. It was a very large aircraft for a fighter and it was not very pretty by aviation standards. It looked like some giant had stepped on its nose and kicked it in the tail; however, it flew on the 27th of that month and is still flying today, 5,195 Phantoms later. From these beginnings until well into the 1970's the F4 Phantom II would be the primary fighter aircraft of the free world.

By 1982 the F4 had fought in 5 major conflicts, nine years in Southeast Asia, twice in the desert of the Middle East and against each other at one time. It was used in every role; Fighter interceptor, Fighterbomber, Reconnaissance, Tanker and Drone. They specialized in attack roles as Wild Weasel defense suppression and laser designator bombers. They also defeated the best aircraft that the opposition could put against it. The only time it lost was when pitted against another F4, during the Greek-Turkey conflict. With the U.S. Navy in the headlines everyday with this new interceptor, the American Defense Department ordered competitive tests be flown against the best aircraft in the U.S. Air Force inventory. Convair's F-106 Delta Dart was selected to fly against the Navy's Phantom II, and the Phantom easily won top speed, low-level speed, altitude, plus the unrefueled range and radar range. Following this flyoff, much to the disgust and embarrassment of the Air Force, it was decided that the next Air Force fighter would be this U.S. Navy design. It would at first supplement, then totally replace the Air Force F100; F102; F104 and F105 strike and interceptor aircraft. Under the designation F110A, the Air Force Phantom II was basically a Navy-4B airframe with changes made to meet Air Force requirements. Following the F-4C, which was essentially the same aircraft as the designated F110A, the F-4D version was more closely tailored to meet the requirements of the Air Force. With these two versions, the Phantom II established its unparalleled esteem in the U.S. Air Force.

The F-4's in the U.S. Navy had numerous variants through its career to fulfill various requirements from the Navy as well. Following the F-4G, which was developed as a trial, the next variant was designated the F-4J to avoid confusion with the original F4H-1 The F-4J was designed as the follow-on to the original F-4B, correcting some of the deficiencies which had become apparent in service. Its maiden flight was made on 27th May 1966, and mass production started shortly after. As the F-4J was developed for the U.S. Navy in parallel with the F-4D of the Air Force, they had a few differences. The new J79-GE-10 powerplant was further improved from the previous J79-GE-8 to yield more power. Internally, upgraded radar, with an improved fire-control system and a new missile-control system, were fitted to earn even better interception and ground attack abilities. In addition, a fixed inboard leading edge along with a slotted tailplane contributed to better maneuverability at low speeds. Lift at low speeds was further enhanced by furnishing 16.5? dropped ailerons. As a consequence of these alternations, its approach speed was reduced by 20km/h. A further noticeable difference from the previous variants was the bulged inner wingfoot to accommodate the larger wheels employed to cope with its increased weight. Armament was also bolstered. AIM-7 Sparrows and AIM-9 Sidewinders were equipped as the main weapons for air-to-air combat, and a wide variety of bombs, missiles, rockets and explosives could be fitted according to the mission. The maximum load of armament was 5 tons which made the F-4J's attack capability outstanding. Further changes were introduced during the course of production, such as a provision of Sidewinder Expanded Acquisition Mode (SEAM) and addition of various dogfight-capable computers.

It was in March 1967 when the F-4J's delivery to the corps started. U.S. forces were in midst of the hard-fought conflict against North Vietnam. Back in 1961, the U.S. government decided to send their troops to Vietnam to support the South Vietnamese government, and the conflict kept spreading day by day. Under these circumstances, the Phantom II played a main role in the sky. The Navy's Phantom II's were flown from aircraft carriers, and the Phantom II's of the Air Force and the Marines were flown from their bases in South Vietnam and Thailand to engage in North Vietnameses's MiGs. It was the end of May 1968 when the F-4J's carried on the aircraft carrier "America" first appeared over the Vietnamese sky. On 21st July, an F-4J shot down a MiG 21, which was recorded as the first kill by the F-4J. F-4J's streamed to the battle field, and achieved outstanding military results against MiG's especially after resumption of the North Vietnam bombing. The only "Ace" status in the U.S. Navy during this conflict was attained by an F-4J on 10th May 1972. Lt. Randy Cunningham and Lt. William Driscoll, who had already shot down a MiG 1 and MiG 17, gained three MiG 17's on the day, making themselves the first aces. However, their "longest day" was not concluded. Soon after their fifth kill, on their way back, their F-4J was tagged by a missile from the ground and the pair ejected and were rescued at sea.

The mass production of the F-4J ceased in December 1972, recording 522 aircraft as the total number produced. The F-4J proved its superb combat capability mainly in the Vietnam conflict throughout its career, and contributed to establishing the high reputation for the Phantom II series all around the world. Seven F-4J's were slightly modified for use by the U.S. Navy's "Blue Angels" flight demonstration team as well. These aircraft had oil and smoke injectors added, and were beautifully painted in the team's attractive blue and gold colors. Their acrobat demonstrations fully utilized their full potential at the many air shows held for the public. Although being replaced gradually by the F-14 Tomcat in the Navy and the F-15 Eagle in the Air force in recent years, the Phantom II dominated the sky all over the world as a guardian for western alignment till the 80's.

1/32 Scale Aircraft
The largest of the Tamiya Aircraft Series features some of the most famous fighter aircraft in the world including the WWII Spitfire MK.IXc. This scale allows even the cockpit and engine details to be accurately reproduced to incredible detail.

Tamiya has a reputation for producing some of the finest assembly kits available and the 1/32 scale Aircraft Series is no different. Many of the aircraft feature materials such as rubber tires and metal parts which add even more realism and durability. Some models also have accurately replicated movable parts.

These large aircraft once finished will be a dominant and impressive part of any modeller's collection.
Tamiya's famous assembly instructions are designed to be understood by both the experienced modeller and hobby newcomer.
Tamiya's range of paints and modelling tools are available to allow these models to be finished to a high standard.
These assembly kits require paint and modelling glue available separately.

Payment

We accept payment via PayPal only. Please complete the eBay checkout and proceed to PayPal to confirm your secure payment.
Please make sure you delivery address is correct BEFORE you complete payment - we are unable to alter the delivery address after your payment has been processed.

Shipping

Please see the Postage section beneath the Price information further up the page for eBay to calculate your shipping rate. 
If you require a shipping cost for a different country please select "See all Details" and choose the relevant country from the list.
If you placing a large order for delivery outside of the UK please contact us and we will work out the shipping cost manually.

Returns

Unwanted - Not Wanted
An unwanted product can be returned for a full refund within 30 days of delivery as long as it’s still in its original, unopened packaging.
In accordance with your rights when you purchase goods online, unwanted items can be returned even if you have opened them for inspection as long as you let us know within 14 calendar days from the day after delivery. You can examine the goods as you would in a shop but to obtain a full refund you must not use them. The goods must be returned in ‘as new’ condition and in their original packaging. The packaging must not be ripped or damaged or we reserve the right to refuse the return.
Returns and exchanges can only be processed with proof of purchase. Please provide your order number and full address when you return a product.
We are not liable for return shipping costs for unwanted item returns.
Faulty/Damaged
If you have received a damaged or faulty item from us you can return it for a repair, replacement or refund.
If the item is faulty or damaged we will cover the costs of the return shipping, please contact us for your free returns label.
Please make it clear what the issue is on our returns paperwork, as some minor issues may not be very clear to our returns department.
Please note that some manufacturers prefer to deal with faulty items themselves, thus it may be possible that returns are sent directly to the manufacturer. Please do not see this as us trying to avoid your return, its simply the manufacturer giving an easier and quicker way to get a replacement/repaired product back to you.
Incorrect
An item received incorrectly can be returned for a refund or replacement. Please make it clear on the returns paperwork which action you would like us to take.
If the item is incorrect we will cover the costs of the return shipping, please contact us for your free returns label.