Features:
E-type connector
Wrench type
Precise technology, Steady, no vibration while revolving, offering a steady operation.
Suitable for any E-type handpiece accords with ISO standard
135°C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece:
Low Speed 22,000-27,000 rpm.
The shank of the instrument mounted therein is 2.35 mm
Fastening of the instruments with a turning latch
Autoclavable 135°
For any lab or E-type motors
For any lab or E-type motors
Straight Nose cone:
Working pressure: 0.3MPa (4-hole);
0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
Noise: ≤68dB
Air consumption: about 56L/mi
Ratio: 1:1
Max speed of contra angle: 25000rpm/min.
Air Mortor:
Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
1:1 Direct Drive
Midwest 4 holes
Max speed 20,000 min-1
2. NSK Style Dental High Speed Handpiece Push Button Type 4-Hole
Features and Specifications
Needle change type: push button
Single water spary
Rotate speed without load:350000 r/min
Rotate air pressure:108-245Kap
High-temperature: 135 ℃
Stainless Steel earing
Noise level: ≤68 dB
Under normal circumstances bearing life: 5-10 months
Applicable Bur: 1.6mm and should be conformed to ISO standard
Modern clipper-built designation with elegant and attractive appearance
Durable fastidiously request for designation,technology and materials.
Packing list:
1. contra angle *1
2. air motor*1
3. straight handpiece*1
4. High Speed Handpiece 4-Hole *2
