Boat Trailer Leaf Spring Slider Hanger Single Axle 25 1/4 Double Eye Springs
Item Description
This listing is for a set of Single Axle Leaf Spring Sliders for 25 1/4 inch Double Eye Leaf Springs. Spring Sliders are intended to be bolted or U Bolted to your boat trailers frame. They perform several functions. They mount your suspension system, including Leaf Springs, Spring Shackles, and Trailer Axle. Additionally, these include Fender Brackets, for mounting your single axle fenders.
 

You would be searching for this product for one of two reasons. Either you currently have these on your trailer, they have rusted or broken over time, and you are needing exact replacements. Or, you current Leaf Spring Hangers have rusted or broken, and you are looking for another way to mount your suspension system to the frame of your trailer. 
Two important factors with using this system if you are not currently using it. This Model uses 25 1/4" Double Eye Leaf springs, in any carrying capacity and number of leafs, so you must use this length of spring. Second, if you are not replacing your trailer axle, switching to Leaf Spring Sliders may change the location of your Leaf Springs in relation to your Axle. Your Trailer Axle may have a Hole Drilled in it, or welded pad for accepting the Leaf Spring Tie Bolt that holds the Leaf Together. The Spring Sliders will more than likely change where the Springs will need to mount. If you have any questions about this, please contact us for further assistance. If you are also replacing your Axles with us, then we can help you determine where your new Leaf Spring Assembly will be mounted.
If this is an exact replacement, then little will change about your suspension system.  Sometimes the Fender Brackets appear slightly different on newer designs than how they were made 10 years ago, but the function remains the same. 
If you are wanting to use this item, then you must make sure you use the appropriate Leaf Spring moving forward. 

Using a single axle Double Eye spring slider suspension system means you must additionally use Trailer Leaf Spring Shackles to complete your system.  You additionally will use 1/2" Diameter x 3 1/2" Long Leaf Spring Mounting Bolts for this assembly. This Items are not included with this Listing, but are available separately in our Ebay store
These Single Axle Hangers do have a Left and Right, Front and Back. You can look at the photos with this listing to verify. Or, just know that the Narrower Hanger goes towards the rear of the boat trailer, as you will mount your Leaf Spring Shackles to the outside of this hanger, in order to mount the back of the leaf spring. 

Please Refer to the Photos with this listing for exact measurements of the product in order to confirm that this is what you are looking for. This product is Made of Heavy Duty 2" x 2" Hot Dipped Galvanized Steel Angle.

Important Notes About this 25 1/4" Single Axle Leaf Spring Slider Pair and Mounting Tips
This Listing is For Both Sides, so you will get a Pair of Sliders. 
This Listing uses 25 1/4" Double Eye Leaf Springs
These Fender Mounts are 29" Apart, so you can mount a 29 inch Long fender at the very bottom, or mount a 30"-32" Fender slightly above the bottom of the Fender (This is the most common Fender used) You will mount your trailer fenders using 3/8" Diameter Trailer Bolts.

To Mount this assembly, you can either mount it exactly the same way your current slider system was...OR
One of Two Ways. 

Trailer Bolts - Using 1/2" Diameter Through Bolts is most common on I Beam Trailer frames. You will drill a hole through the Slider, and your Aluminum Frame, and using (2) Bolts per slider, mount to your trailer Frame. ( So 2 Holes per side)

Boat Trailer U Bolts and U Bolt Mounting Plates - Using 1/2" Diameter U Bolts is common on Square Tubing Frames, C Channel Frames, and even smaller I Beam Frames as it does not require drilling. The Key here is to use (2) U Bolts and (2) Plates per side that have matching widths to work with each other. You will select the Width of U Bolt that will not only be wide enough to go around your frame, but also accommodate the width of the Spring Slider. 
Example: A 2" x 3" Rectangular Tubing Frame could use a 3 inch Wide U Bolt and Matching Shackle. As the U Bolt is wider, you would set the U Bolt and Shackle at an angle, securing each side against the frame, and tighten it down. 
In the above example, the Length of the U Bolt could be 4 5/16" to accommodate the height of the Frame, thickness of the Spring Slider, and Thickness of the Spring Shackle. 

Not all methods of mounting these sliders is identical, but common diameter trailer frames are not to difficult to identify. Sometimes, you can measure your current hardware, and purchase matching replacements. 

Mounting Hardware for this assembly is available separately, as not all trailers will be the same.

eBay item #351640134868

About Us

Sturdy Built Trailer Parts is a dedicated Family Business that has been offering the highest quality of Customer Service at the Best Prices since 1989. We are committed to our Customers both in our Retail Store, and Online. Our Sales Staff is happy to assist you with any questions or comments you have about the products we offer. We are a Florida Based company, with an in depth knowledge of all types of trailers. Our Sales Team is trained on everything from Boat Trailers to Equipment Haulers. We do what you do, and we are here to help get your trailer back on the road. 

We additionally Have A Florida Retail Store Location For Local Customers as Well, Fully Staffed with Sales Team Members to Outfit all Your Trailer Needs.-----------

2020 51st Ave E #100, Palmetto, FL 34221------------

Payment

All Transactions and Payments are Processed Directly through Ebay in accordance with the Payment Methods and procedures that Ebay provides, and are protected and secured as such.

Fast Shipping

All items ship either Same Day or Next Business day, with 99% of orders placed before 1 pm EST shipping same business day. 

We will upload your Shipment Tracking Number for you to monitor your Order all the Way to its destination

Orders May Ship via Fed Ex or USPS

International Buyers are responsible for import fees

All items are Carefully packaged to ensure they arrive in Perfect Condition

Terms

All Items are stocked, sold, and shipped in Brand New condition and carry their respective manufacturers Warranties. For Specific Warranty Information, reference the individual item and listing you are interested in Purchasing. Please contact us with any product questions or concerns. Our Sales Team is in place to assist you with any product or shipping questions that you have.

Returns

Return Orders are Accepted for Most Orders Placed on our eBay store.  You may see some items listed as 'Closeout' or 'Sales Final', which are often sold at a discount, but, are not returnable.  Please check individual listings for their return policy prior to purchasing. 
Please double-check your order for accuracy to minimize the likelihood of needing to return your purchase. If you have any questions, contact us before submitting your order.

We encourage you to contact us within 30 days of receiving your eBay Order so we can assist you with any questions regarding your order or return. We have a Sales Staff in place to assist you with any questions or concerns you have.
Add to Favorite Sellers Sign up to Newsletter View Feedback Contact Seller Visit seller's eBay Shop About Seller Page
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.