Connects2 CTSNS016.2 Steering Wheel Stalk Control Adaptor For Nissan
+ FREE CTMULTILEAD.2 Patch Lead
Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Included Free CTMULTILEAD.2 Stereo Patch Lead
Compatibility:
Car Make / Model | Year | Radio |
Nissan 350z | 2002 - 2005 | (Z33) |
Nissan Navara | 2006 - 2014 | (D40) |
Nissan X-Trail | 2001 - 2003 | (T30) |
6 & 10 Way Nissan Connector, OEM Specific
CHECK YOUR VEHICLE PLUGS FIRST BEFORE PURCHASE.
ONLY SUITABLE IF YOUR VEHICLE HAS 3 PLUGS AS SHOWN IN THE PHOTO
Features Highlight:
IMPORTANT INSTALLATION NOTE: BOSE REMOTE TRIGGER WIRE FOR 350Z, Nissan 350Z Remote Wire / Purple With Red Tracer, Vehicles Fitted With BOSE Amplifier Require a Manual Connection To This Wire From Remote Output Wire From Stereo Wiring Harness.
This will Trigger The Amp To Turn On When Your New Stereo Turns On.
PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.
CTMULTILEAD.2 Universal head unit connection lead is suitable for:
Notes:
Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads
TECHNICAL NOTE:
IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.