You may also like
EPEVER MPPT Solar Charge Controller,Tracer-AN Series.
40A/30A,12V/24VDC AUTO,
Max 100V PV Input,With LCD display.
Battery : Sealed, Gel, Flooded,Lithium.
Include Remote meter MT50.
About this item
• Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.
• 100V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss.
• Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.
• Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery
• Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter
Product Feature
• MPPT tracking efficiency above 99.5%
• Maximum charge conversion efficiency as high as 98%
• Support lead-acid and lithium-ion batteries
• Multiple load work modes
• Charging power and current limitation
• High-temperature charging power derating function
• Standard Modbus communication protocol with RS485 interface
• Real-time energy statistics
• Negative Grounding Design
• 100V PV input allows more panels connected in series
• Work with LiFePO4 Lithium Battery And Lead Acid Battery
Something you should know for Lithium Batteries Charging
1. When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.2. When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
3. This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
4. Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.
Model 30A 40A Nominal system voltage 12V/24VDC auto work Rated battery current 30A 40A Rated load current 30A 40A Max. PV open circuit voltage 100V Max. battery voltage 32V Max. PV input power 390W (12V) 520W (12V) 780W (24V) 1040W (24V) Equalize charging voltage Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V Boost charging voltage Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V Float charging voltage Gel /Sealed /Flooded: 13.8V Low voltage reconnect voltage Gel /Sealed /Flooded: 12.6V Low voltage disconnect voltage Gel /Sealed /Flooded: 11.1V Self-consumption ≤20mA(12V) ≤16mA(24V) Grounding Negative ground Temp. compensation -3mV/℃/2V Communication Port RS485 / RJ45 interface Working temperature -25℃～+45℃ Storage temperature -35℃～+80℃ Humidity ≤95% N.C. Enclosure IP30 Overall dimension 228x164x55mm 252x180x63mm Terminal 10mm2 10mm2 Net weight 1.2kg 1.9kg
Remote Meter MT50 :
Features:
• Automatic identify the controller, and display relevant parameter data
• Large-screen informative LCD displays all the operating data and system working status
• Simple and convenient operation
• Real-time alarm of failure information
• Longer communication distance based on RS485
• Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control
• Battery type selection: Gel, sealed, flooded and User(programable)
• Programmable parameters
• Energy statistics display function
Self-consumption: Backlight and acoustic alarm on<65mA
Backlight on<23mA
Backlight off <15mA
Faceplate dimensions: 98×98 mm / 3.86×3.86 in
Frame dimensions: 114×114 mm / 4.49×4.49 in
Connector type: RJ45
Meter cable: Standard 2m, max .50m
Meter weight: 0.190 Kg
Ambient Temperature: -20℃~+70℃/-4℉~158℉