• Here we have another great set from Proops Brothers Ltd.

• Made and designed by our parent company Linic Plastics Ltd here in Fleckney, Leicestershire.

• Made of rigid plastic.

• 0-9 number candle mould trays:
• Each number measures about 45mm x 30mm plus a place to put a cocktail stick or the like.

• Square/rectangular tapered candle mould: 
• Top and sides measure 60 x 60 x 120mm tapering down slightly.
• Square on the bottom measures 50 x 50mm.

•  A step by step guide on how to use the number tray:
1. Start by using a bit of mould release spray or olive oil spray in each of the number moulds.
2. Secondly place a cocktail stick in each of the allotted slots below the number.
3. Then place a bit of blu tack at the bottom of the number/letter where the mould meets the cocktail stick to make sure the wax does not leak.
4. Using approximately 30mm of wick, place the wick in the mould, making sure it touches the top of the gap above the number.
5. Put some more blu tack at the top of the number to ensure the wax does not leak through to the top of the wick.
6. Pour in your wax and leave your candle to set. 
7. Once your candles have set, remove both pieces of blue tac and carefully remove each mould starting from the bottom of the cocktail stick where there is an area to prise with your finger. Or alternatively, you can gently turn the tray over for those moulds that may be more difficult to release, but please be careful not to break them.


• PLEASE NOTE THAT YOU WILL ONLY RECEIVE THE MOULDS.  THE CANDLES AND OTHER ITEMS SHOWN ARE FOR VISUAL REFERENCE PURPOSES ONLY.

• The heart candle mould tutorial is given as the same principals apply to all of our pillar type moulds. 

• Check out our other eBay listings for a wide range of candle moulds we have to offer all made here in Fleckney, Leicestershire.