LED Fuse Lamp for Marantz Sansui Kenwood Yamaha Sony - Warm White. 

No soldering required! Give your vintage component a fresh and vibrant looking upgrade! These will likely be the last time you replace the bulbs in your component!

8 volt LED fuse lights are designed to be an exact replacement for these older stereo receivers. Back in the 70s and 80s incandescent fuse lamps were used by many companies to back light tuner and control panel displays in stereo receivers. Some of the manufacturers that used fuse lamps in their receivers and component systems include: Marantz, Sansui, Fisher, JVC, Protron, Lafayette, Panasonic, McIntosh, Pioneer, and many others.

Fuse lamps are easy to change, because there is no soldering needed. They slide in and out of a normal 1-1/4 glass fuse holder. Replace all the old fuse lamps and you should never have to do this again. You will fall in love with your stereo receiver all over again once you install these new fuse lights. Your amp will actually run cooler and use less electrical current while you enjoy the soft backlighting it supplies.

These LED fuse lamps have multiple application possibilities, because they can work with 8 volt AC or DC. For quick lighting use a fuse holder, 9 volt battery clip, female quick disconnects and a 9 volt battery. For 12 volt use, add a 100 ohm 1/2 watt resistor and now you have lighting for inside your vehicle. With a 9 volt AC adapter you can add lighting to large scale models or doll houses. Light up panels on small projects with at least 5 VDC. How will you use these long lasting LED fuse lights?

Specification: • Dimensions: 1-7/32" L x 1/4" W (31 x 6.35 mm) • 8 VAC or 8 VDC • Current draw: 23 mA.