Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Package Includes:

• (2) Rockville SBG1188 18" Passive Pro DJ Subwoofers Totaling 2000 Watt
  
• (1) Rockville RPA9 3000 Watt Peak / 1500w RMS 2 Channel Power Amplifier
  
• (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cables
  

Video of SBG1188:

Features of SBG1188:

• Rockville SBG1188 18" 1000 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable
• 18” Pro audio woofer
  
• 500 Watts RMS
• 750 Watts Program Power Handling
• 1000 Watts Peak Power Handling
  
• 3” High temperature aluminum voice coil
  
• 90 oz woofer magnet
  
• Dual Ported Enclosure for Improved Bass Response
• Construction: High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced
  
• Ergonomic Recessed Handles
  
• Molded Steel Grill
  
• Aviation Grade Black Carpet
  
• Pole Mount 
  
• Rubber Isolating Feet
  
• Binding Post / Banana Plug Terminals (Negative/Positive)
  
• 1/4 Jack (In/Out)
  
• SpeakON (In/Out)
• All input/output connections are internally connected in parallel 
  
• Nominal Impedance: 8 Ohm
• Sensitivity: 96dB @ 1w/1m
  
• Frequency Response: 20Hz - 500Hz
  
• Dimensions (W x D x H): 23” x 18” x 26”
• Weight: 53 lbs

Owner’s Manual

Click Here To View Owners Manual

Videos of RPA9:

Description:

Heavy-Duty Powerhouse Pro Amplifier
The Rockville RPA9 3000-watt power amplifier combines efficiency with great sound to deliver a lightweight amplifier that packs a ton of punch. This amplifier is engineered using advanced design and components, creating a lightweight design and extremely reliable operation that can pound daily for years and years of use. The computerized IC controlled protection circuitry allows delivery of peak power while preventing overloads. The RPA9 is optimized for 4 and 8-ohm speakers, and is equipped with a stereo/mono speaker output switch allowing for quick system impedance optimization. The RPA9 amp fits perfectly into standard 19” racks, and is lightweight enough (less than 30 lbs.) to make it incredibly easy to transport.

Top features!
We added a built in crossover so that you can use the amplifier for subwoofers or full range speakers. When connecting subwoofers simply select the low pass. We also added a link output which will allow you to use (2) of these amplifiers together at the same time for venues that demand even more power.

The other enhancement we made is that we added all the input and output terminals that ensure this amplifier is compatible with any setup!

We added XLR and ¼” combo jacks and RCA inputs making this amp perfect for any mixer and any speakers on the market. For outputs, we have banana and speakon outputs plus XLR direct outputs.

Mono Subwoofer-ready
A stereo/mono switch on the rear of the system allows for quick configuration to use multiple speakers in stereo mode or a single subwoofer in mono mode.

Power Ratings:

• RMS Power Output:
  
• Stereo 8 Ohm: 2 x 250W
  
• Stereo 4 Ohm: 2 x 400W
  
• Bridged 4 Ohm: 1 x 800W
  
• Peak Power Output:
  
• Stereo 8 Ohm: 2 x 1000W Max
  
• Stereo 4 Ohm: 2 x 1500W Max
  
• Bridged 4 Ohm: 1 x 3000W Max
  

Terminals:

• Input Terminals:
  
• Combo jack (XLR and ¼”) A & B inputs
  
• RCA A & B Inputs
  
• Output Terminals:
  
• Banana binding post speaker output
  
• Speakon output
  
• XLR direct output
  

Features:

• Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
  
• 2U rack space
  
• Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
  
• Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
  
• Channel A & B Clipping Led Indicators
  
• Channel A & B Separate Level Controls
  
• Power, signal, overload, clipping, and protection LED indicators on front of amp
  
• Heavy duty rack mount ears with handles
  
• Built-in dual high velocity quiet cooling fans
  
• Maximum headroom for 4-ohm and 8-ohm Speakers
  
• Level controls for precise setting and matching of sensitivity
  
• Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
  
• User serviceable fuse (5A, 250V)
  
• Frequency Response: 20Hz to 20KHz <+/- 0.5dB
  
• Distortion: <0.03%
  
• Input Impedance:  20K Ohm Balanced and 10K Ohm Unbalanced
  
• Signal to Noise Ratio: > 102dB
  
• Power Requirements: 120V / 50-60Hz
  
• Weight: 17.19 lbs
  
• Dimensions: 18.97 x 13.97 x 3.54 inch

Owner’s Manual

Video of RCSS1425:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
• 100% Copper Conductors for Lower Resistance
• Black PVC Jacket for Both Durability and Flexibility
• Intended for High-Current Applications Only, Not Line-Level Signals
• Length: 25 Ft
• Gauge: 14

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.