Spindle Motor Specification:
Spindle motor model |
GDZ48-300 |
Brand |
Chang Sheng(made in China) |
Certification |
ISO9001-2000 |
Product type |
High-Speed Constant Torque Motorized Spindle Motor for CNC engraving machines |
Applications |
for CNC Engraving Machine |
Pole number |
2 |
Rated power(KW) |
0.3KW |
Rated voltage(V) |
75V |
Rated speed(rpm) |
60000rpm |
Current(A) |
4.5A |
Frequency(Hz) |
1000Hz |
Cooling |
Water-cooled |
Bearing type |
1×C136101 1×C136018 |
Lubricate |
grease |
Collet(mm) |
ER8 3.175mm(default) |
Repair time |
bearing(half year),spindle(one year) |
Diameter D (mm) |
48mm |
Complete Length L(mm) |
213mm |
VFD Specification:
Model |
E300-2S0015L |
Power (KW) |
1.5KW |
Input Voltage(V) |
1-phase AC 220V ±20% 50/60Hz |
Output Voltage(V) |
0~220V |
Output Current(A) |
7.5A |
Output Frequency (Hz) |
0~1000Hz |
Origin& Warranty&brand |
China & One year&sunfar |
Bracket Specifications :
Type |
Φ48mm Bracket |
Material&Origin |
Cast Aluminium& China |
Cooling Pump&5M Pipe Specifications :
Model |
Cooling Pump |
Power |
75W |
Voltage(V) |
220~240V AC 50Hz |
Hmax |
3.2M |
Qmax |
3000L/H |
Pipe |
5m |
Kindly note:
1. Motorized spindle motors are matched with inverters, choosing inverters should be according to the current, voltage, and frequency of motorized spindle motors.
2. Setting the inverter must firstly set up the basal frequency, its basal frequency is based on the highest frequency of motorized spindle motor, if not setting the basal frequency (the factory setting is 50Hz),the motorized spindle motor would burn out once start running;
3. the highest frequency, break frequency and the corresponding voltage also should be set according to the curve on the operating instruction; setting the current of the inverters is also based on the rated current of motorized spindle motor;
4. the overcurrent is 120% of rated current; overload tripping is 100%, time is 5s;/span>
5.carrier frequency is set by the power of spindle motor,8kHz for less than 10KW motorized spindle motor, 5kHz is for more than 10KW spindle motor;
6.the acceleration time and deceleration time are 10s and 20s respectively, if starting current exceed the rated current and need protection, it should extend the acceleration time.
7.I/O lack-phase protection also should be set above the function of protecting inverters and motorized spindle motors.
8.Connecting the inverter and the three-phase power of spindle motor, solder the inverter three-phase power cord on the plug 1(U1),2(V1),3(W1), plug 4 is ground wire. Then the inverter is connected with the external power supply and start work, then to check whether the rotation direction of spindle motor is consistent wwith its indication direction, if inconsistent, immediately shut down and change two wire on the three-phase power supply of connecting inverter and motorized spindle motor. The motorized spindle motor is prohibited running in the wrong rotation direction.
9.Power lines should be taken waterproof and shielding measures. The connection between motorized spindle motor and inverter should not exceed 25m.When the power cord of the water-cooled spindle motor connects the terminal block, it must be bent into U shape and fixed on the bottom of the terminal block and then connect, so that can protect the condensed water of the power cord into the terminal block.
10.Another, use shielding power lines to prevent its interference to inverter.
Package Included
1 x 300W Spindle
Motor: GDZ48-300
1 x 1.5KW VFD Variable Frequency Drive
1 x Cast Aluminium Bracket
1 x Cooling Pump& Pipe
*Please Do Not click "Return this item" in any situation. Because sometimes it will spend more time to resolve the issue,Click contact us via Ebay Message(protected by Ebay),that is the fastest way to solve any problem for you.
*Returns/Exchanges will not be accepted unless authorization has been issued by our customer service.
*All NON-Seller Mistake returns for refund are subject to 20% re-stocking fee and buyer should pay for the return shipping fee and handle fee.(For example,you brought wrong item or cancelled order after item was shipped).
*All return products should be in brand new state with all accessories included.
*Refunds will be given via paypal only.
*Payment Method: PayPal Only
*If you want to send the payment other than PayPal, please email us first for reference number before the end of auction.
* Orders processed within 24-48 hours of payment verification during working days.
* We ship to world wide for every ones convenience,but remote areas and countrys please note the shipping time will take
* Shipping time and Default method:
1.All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible Please come back soon and visit us again!
2.Welcome to our store! We are a professional worldwide wholesale company. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.
3.We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
4.If you like our products, please add my eBay shop to your "My Favorites" list.