Store category
You may also like
600/1000/1200W LED Grow Light Full Spectrum IR UV Veg Flower Indoor Plant Panel
Product Description
Features:
Free strong hanging kits are available for easy installation
All LEDs with a zener diode to ensure one LED out the rest can still working very well
Transferring 90% of electrical energy into plant absorbable luminous energy.
It is 3 to 5 times in efficiency than HID lights and HPS lights
Specification:
600W LED grow light:
LED lights: 60Pcs 10W Double Chips LED
Chips Qty: 60pcs (Red 38pcs, Blue 12pcs, white 8pcs, UV1pcs, IR1pcs)
Dimensions: 12.2*8.27*2.36inch/310*210*60 mm
Coverage Area: Approximately 3.5 × 4 sq. Ft. (Lighting area and height varies according to plant and environment)
Lumens: 6000lm
1000W LED grow light:
LED lights: 100PCS 10W Double Chips LED
Chips Qty: 100pcs (Red 70pcs, Blue 20pcs, white 8pcs, UV1pcs, IR1pcs)
Dimensions: 310*210*60 mm
Coverage: approximately 3.5 × 4 feet (lighting area and height according to different plants and the environment is changeable)
Actual power consumption: about 90W~130W
Lumens: 10000lm
1200W LED Grow Light
LED lights: 120PCS 10W Double Chips LED
Chips Qty: 120pcs (Red 64pcs, Blue 28pcs, white 26pcs, UV1pcs, IR1pcs)
Dimensions: 113.45*8.26*2.36 inch / 310*210*60 mm
Coverage: approximately 3.5 × 4 feet (lighting area and height according to different plants and the environment is changeable)
Lumen: 12000lm
Application: Ideal for all phases of plant growth, and works well with water solution culture and soil culture. Can be used in house garden, pot culture, garden, sowing, breeding, farm, flower exhibition, bonsai, garden, green house, sowing, breeding, farm, greenhouse cultivation, water soluble breeding, greenhouse cultivation, pipeline cultivation and so on.
Package includes:
1X US Plug power cord
1X hanging hook
Instruction of LED Light Fixture :
Attentions & Cautions:
1-Working voltage: 85~265V
2-Working environment: -20℃~40℃
3-Recommended height to the plant: 0.5m~1.5m according to different growing stage
4-Suggested continous working time: 10~16 housrs per day
5-It is required to make product work indoor
6-Please do not touch or strike the LED light during its normal working
7-Be sure not to make the product get any touch with water or use it at the place where the water is dripping
Question 1: The actual power of the plant lamp is inconsistent with the title power?
On the "power of the plant lights with the title power is inconsistent" problem: take 1000W light as an example, not to say that the entire lamp at work when the power is 1000W, 1000W is: each of our lamp beads (dual chip) can bear power is 10W, that is, the rated power is 10W (rated power is not necessarily the actual power), then 10W * 100LEDs = 1000W.
Why is not the power of our lights made to 1000W?
Answer: For the work environment, the heat problem is one of the most important reasons: for the customer to consider economic costs, we let it work in low power conditions, the product life longer.
Question 2: Part of the lights do not shine?
Part of the lamp beads do not light is divided into three cases:
1. a part of lights does not shine, indicating that the control of this line of power does not work, you need to check the power to see if the power cord is released, if not released, the line is complete, then confirm the power is bad, need to replace the power supply, the supplier can give us free power supply, we can also provide this compensation to customers.
2. If there are a few lamp beads do not shine, it shows that the lamp beads are broken, you need to replace the lamp beads, if not replaced will not affect the normal operation of other lights, because we have a tube above the wire diodes, the realization of this lamp bead does not affect the other lights work properly.
3. Infrared light bulb does not shine
There is also a case of infrared light is not bright (is the customer misjudgment): for the infrared light beads, its brightness is not high, relatively dark, and some customers will think it is bad, in fact, it is not bad.
Question 3: Lamp intermittent work shiny (flashing when working)?
If there is a fixed frequency of intermittent, that is, power does not match with the light board lead. Need to replace the power, or else cannot solve this problem;
The lights flash at work, but also the power does not match with the light board. Need to replace the power supply, can be resolved.
Question 4: Suspension height
The power of more than 100W in the proposed suspension height of 0.5-2 meters away from the plant, the power of less than 100W in the proposed suspension height of 0.3-1.5 meters away from the plant, the specific light photosynthesis effect as the photo in the description.
On the "power of the plant lights with the title power is inconsistent" problem: take 1000W light as an example, not to say that the entire lamp at work when the power is 1000W, 1000W is: each of our lamp beads (dual chip) can bear power is 10W, that is, the rated power is 10W (rated power is not necessarily the actual power), then 10W * 100LEDs = 1000W.
Why is not the power of our lights made to 1000W?
Answer: For the work environment, the heat problem is one of the most important reasons: for the customer to consider economic costs, we let it work in low power conditions, the product life longer.
Question 2: Part of the lights do not shine?
Part of the lamp beads do not light is divided into three cases:
1. a part of lights does not shine, indicating that the control of this line of power does not work, you need to check the power to see if the power cord is released, if not released, the line is complete, then confirm the power is bad, need to replace the power supply, the supplier can give us free power supply, we can also provide this compensation to customers.
2. If there are a few lamp beads do not shine, it shows that the lamp beads are broken, you need to replace the lamp beads, if not replaced will not affect the normal operation of other lights, because we have a tube above the wire diodes, the realization of this lamp bead does not affect the other lights work properly.
3. Infrared light bulb does not shine
There is also a case of infrared light is not bright (is the customer misjudgment): for the infrared light beads, its brightness is not high, relatively dark, and some customers will think it is bad, in fact, it is not bad.
Question 3: Lamp intermittent work shiny (flashing when working)?
If there is a fixed frequency of intermittent, that is, power does not match with the light board lead. Need to replace the power, or else cannot solve this problem;
The lights flash at work, but also the power does not match with the light board. Need to replace the power supply, can be resolved.
Question 4: Suspension height
The power of more than 100W in the proposed suspension height of 0.5-2 meters away from the plant, the power of less than 100W in the proposed suspension height of 0.3-1.5 meters away from the plant, the specific light photosynthesis effect as the photo in the description.
A positive feedback from us to you guaranteed! We promise that we will leave you an absolutely POSITIVE feedback after your verified payment is received.
We gladly accepts payment via PayPal. Paypal allows customers to pay via all major credit cards (Visa, MasterCard, Discover, American Express) and via electronic checks (e-checks).
Please
give us a notice when you pay for the order through a unique payment
without using the "pay now" button on eBay. So that we can assure you a
timely shipment.
Almost all of the orders will be shipped the same business day(MON-FRI).
We
are a reliable US company and authorized sales-tax withholding agent in
the state of Ohio. Only Ohio residents are required to pay 7.5% sales tax on item price plus shipping fee.
30-day Money-back Guaranteed!
We appreciate your interests and trust in our quality products. We have
very strict quality control system, so we have extremely low defect
rate. We ship safe and sound, well-packed.
We value our customer service as the real and most important product of
USA111 Inc., so we offer one-year warranty and 60-day money back
guarantee for all of our products!
a.
Within two months after transaction: As a professional company, we
would kindly accept return and request for refunds for whatever reasons:
Full refund with shipping fee or Free exchange for return/exchange of
defects or wrong items, and we pay two-way shipping fee; Full refund or
free exchange for return/exchange of Non-defects, which should be in
original conditions with all original package contents, and the buyer
should pay the two-way shipping fee for exchange or get refund of item
price only.The safest shopping you can have any-where!
Buy our products with confidence!
You
can contact us through eBay messages to get a free copy of warranty
details. What's more, a RMA# will be offered before an item returned to
us. Thank you.
If you are dissatisfied for any reason, please contact us before leaving feedback. We strive to ensure that you are satisfied with your purchase and will do everything we can to make sure you have a positive experience.
On Mar-04-18 at 23:46:25 PST, seller added the following information: