Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Package Includes:

• (1) NYC Acoustics NC12S4 1600 Watt 12" 4 Ohm Car Audio Subwoofer with LED Sub Grille
• (1) Boss Audio Armor AR1600.2 1600 Watt 2-Channel Car Audio Amplifier Amp+Remote
• (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA

---

Authorized NYC Acoustics Dealer!

Video of NC12S4:

Description of NC12S4:

The NC12S4 is one of the coolest subs on the market. It has a really cool LED that has 2 modes: a sound activated mode that goes to the beat of the music, and a constant mode.

The grille is awesome, but the sub is what is important! This sub is a rock solid performing sub. It is powerful with 400 watts RMS power handling! It is enough power to make houses a block away from you shake as long as you are using a good amp to power it. This sub has a 40 oz magnet, thick rubber surrounds to eliminate distortion, and 2” voice coils wound with 100 % copper wire!

The sound quality is incredible on these! They have a frequency range that is better than almost any sub on the market! This sub plays the low frequency deep bass notes loud and clear! What makes it even more unique is that it is capable of playing frequencies up to 1.2KHZ depending on how you set your crossover.

Features:

• NYC Acoustics NC12S4 12" Car Subwoofer with LED grille
  
• Power Handling: 1600 Watts Peak
  
• Power Handling: 400 Watts RMS
  
• LED grille has 2 settings that can either go to the beat of the music or stay a solid color
  
• LED gets wired to the power terminal of your amplifier, which means there is no additional wired you need to run
  
• LED is multi colored (RGB)
  
• LED On/Off switch
  
• IMPP Cone
  
• Thick Rubber Surrounds
  
• IMPP Dustcap
  
• Two Gold-Plated Push Terminals
  
• Steel Basket
  
• 2" Voice Coils
  
• 4 Ohm Voice Coils
  
• 40 Oz Magnet
  
• 6mm T-Yoke + 6mm Washer
  
• 4-Layer Aluminum Voice Coils with 100% Copper Winding  
  
• Spider is made of a special polyester and cotton blend
  
• Ultra Saturated, High BL Magnetic Motor Gap
  
• Cutout Diameter: 11.06” inches
  
• Mounting Depth: 5.5” inches
  
• Frequency Response: 29HZ-1.2K HZ
  
• Sensitivity: 86.5dB
  
• Sealed Enclosure Volume: 1.0 – 1.75 Cubic Feet (1.09 Cubic Feet Optimal)
  
• Vented/Ported Enclosure Volume: 1.3 – 2.0 Cubic Feet (1.5 Cubic Feet Optimal)
  
• Weight: 8.95LBS
  
• TS Parameters:
  
• Le: 1.36 mH
  
• Fs: 29 Hz
  
• Re: 4 ohms
  
• X-max 0.24”
  
• Qts: 0.717        
  
• Qms: 4.149                        
  
• Qes: 0.867                       
  
• Vas: 3.16cf
  
• Mms: 139g.
  
• BL: 10.1 T-m
  
• Detailed Info:
  
• Frame thickness: 1.0 mm
  
• Finish: Black
  
• Body: IMPP
  
• Surround: Extra Thick Rubber
  
• Gap Plate Inside Diameter: 55.5mm (2.18 inch)
  
• Gap Plate Outside Diameter: 145mm (5.69 inches)
  
• Gap Plate Thickness: 6mm (0.236 inches)
  
• Yoke Outside Diameter: 145mm (5.69 inch)
  
• Yoke Thickness: 6mm (0.236 inches)
  
• Yoke Pole Diameter: 50mm (1.968 inches)

Owner’s Manual

 

---

Advantages of buying from an authorized seller:

 

• Best prices - We sell all NYC Acoustics Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by NYC Acoustics product experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note : If you purchase NYC Acoustics from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, or even working.

---

Features of AR1600.2:

• Boss Audio AR1600.2 ARMOR 2-Channel MOSFET Power Amplifier
• Peak Power Output: 1600 Watts
• Peak Power @ 2 Ohms 800 Watts x 2 Channels
• Peak Bridged Power @ 4 Ohms 1600 Watts x 1 Channel
• RMS Power Output: @ 4 Ohms 260 Watts x 2 Channels
• Amplifier Class: Class A/B
• Technology: MOSFET
• Number of Output Channels: 2
• Frequency Response: 9 to 50000 Hz
• Total Harmonic Distortion (THD) @ RMS Output: 0.01%
• Signal-to-Noise Ratio (SNR): 105 dB
• Variable Low Pass Crossover: 35 to 160 Hz
• Minimum Speaker Impedance: 2 Ohms
• Minimum Speaker Impedance in Bridged Mode: 4 Ohms
• Tri-Mode Operation
• Soft Turn-On Circuit
• Power & Protection LEDs
• Thermal Overload & Speaker's Short Protection
• Bridgeable
• Remote Subwoofer Level Control
• Dimensions: 2.5" x 13.1" x 6.5"

---

Advantages of buying from an authorized seller:

• Best prices - We sell all Boss Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Boss product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Boss from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

---

Video of RWK81:

Description:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) sets of RCA cables.

Features:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 8 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 8 Gauge SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.