electric underfloor heating mat kit 150w per sqm
lifetime warranty with Wi-Fi thermostat options & free fast delivery
150w/m 2 electric underfloor heating mats are suitable as a primary heat source when fitted with the correct insulation. Ideal for all rooms including Bathrooms, Wet rooms, and Kitchens 150w/m 2 is the most commonly used wattage, and power output. All our electric underfloor heating mats are dual core making them super easy to fit and wire in as they have just one connection end. All mats come with self-adhesive mesh backing. The adhesive is pressure sensitive to hold the entire mat firmly in place and for total peace of mind, the underfloor heating is backed up by a lifetime warranty.
Should you have any questions whether buying, installing or running our underfloor heating, Living Heat is always here to help and offers a Free technical help service to assist you all the way. Our heat mats all come as a kit with full fitting instructions and can be used as a primary heat source or for simply floor warmup assuming sufficient coverage and insulation is installed.
You may also require
Included
| PRODUCT COMES WITH |
|---|
| Floor probe (When Ordered with thermostat) |
| Fixing Tape |
| Fitting Instructions |
Things to know about this product
All Living Heat Underfloor Heating mats for use under tile and stone flooring is suitable for use as a primary heat source assuming sufficient coverage and insulation is installed. In high heat loss areas, you may wish to install our high output 200w/sqm units. Please note that on un-insulated subfloors especially concrete we highly recommend the use of suitable insulation installed over the subfloor. This will increase the response rate and maintain the high efficiency of all our underfloor heating systems.
Each mat is 0.5m widths x your required length to achieve your desired coverage. The heating elements are double insulated and earthed so suitable for dry and wet areas such as bathroom floor heating, wet room floor heating or any other room you may wish to install underfloor heating. At only 3mm in depth, our mats and heating elements are ultra thin to minimise floor height allowing the heating to be simply embedded into the tile adhesive.
Please Note we produce mats from 1m 2 - 16m 2. For larger areas, multiple mats are used to cover the required area and can all be wired up to one suitable thermostat to be controlled together.
Technical Information
- 150w Heating System
- Operating Voltage 230/240V 50Hz
- Mat width: 0.5m
- 3m long cold / connection tails
- Dual Core Heating System
- Double insulated & earthed heating element
- Ultra thin & durable heating element (Only 2mm deep)
- Easy and quick to lay
- Pre-spaced wire attached onto tough fiberglass mesh backing
- Life Time warranty
Living Heat underfloor heating cables have been specifically designed to be used under tiles and natural stone floors. They are all capable of being used as the primary heat source, (No other heating required). A minimum of 70% floor coverage is recommended at 150w/m 2or above for use as a primary heat source. But in some instances, larger areas for example. A higher wattage may be required.
Our kits are easy to lay. And do not increase the floor height as the heating cables are only 3mm deep. So they are easily buried in the tile adhesive. The cables are simply held down using the fixing tape at the desired spacing. And then tiled over in the normal way. We also offer a Technical Free Phone Helpline for any questions or help you may have/require.
It is not recommended to install underfloor heating over an uninsulated concrete subfloor. Areas without the addition of a 6mm+ insulation layer are first being installed. This is because an uninsulated concrete floor greatly reduces the response time and overall efficiency of any underfloor heating system.
Living Heat offers other underfloor heating options and insulations in our eBay shop. For almost any room size and floor covering. Please feel free to contact us if you have a specific requirement.
There is no specialist labour or tools required to lay and fit Living Heat kits. The only qualified person required is an electrician to make the final connection to the mains power.
If you require assistance please do not hesitate to contact us. contact information can be found near the bottom of this page.
Our range of thermostats fit into a standard 1 gang back box. And can carry a maximum load of 16amps. After this threshold is passed a simple contact or relay switch must be installed.
No Thermostat
We would not recommend Underfloor heating without a thermostat and floor probe to control your underfloor heating system.
Option 1
M1 Manual Thermostat
- On/Off Switch
- Temperature Turn Dial
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 2
M5 Manual Thermostat
- 2.6" LCD Screen
- Air and Floor temperature sensors
- Blue LED backlight for easy viewing
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 3
T5 Touchscreen Thermostat
- Touch Control LCD Screen
- Fits standard 1G electrical wall box
- Low profile design
- 1 Year manufacturer's warranty
Option 4
Wi5 Wi-Fi Thermostat
- Touch Buttons
- Alexa & Google Enabled
- Full Wi-Fi Phone Control
- Low brightness backlit for nighttime bedroom use
- Auto / Manual
- 6 Events per day
- Frost protection
- Temperature Override
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 5
CT1000 Wi-Fi Colour Touchscreen White Thermostat
- Full Wi-Fi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 6
CT1000 Wi-FI Colour Touchscreen Silver Thermostat
- Full Wi-Fi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 7
CT1000 Wi-FI Colour Touchscreen Black Thermostat
- Full Wi-Fi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 8
Installation and Fitting
To work out what size kit you require please follow the next 3 steps.
Step 1. Measure the total floor area that you wish to be heated. (Less any immovable objects such as bath or kitchen units that you do not want the heating to be fitted under).
Step 2. Take off a 10cm border around the floor area to be heated as the heating elements should not be run up tight against any walls.
Step 3. This measurement should then be rounded down to the nearest 0.5m, (ie 5.27m 2 floor size would be rounded down to a 5m 2 kit size). The measurement can be rounded down to the nearest 1m on larger room areas.
Fitting Guide
1. Make sure the floor area is level, clean and free of any dust and debris. If laying tiles the floor should be made suitable for laying tiles before the heating or insulation boards (if required)are laid.
2. To fit the heating cable the heated floor area must be first marked out with clear markings at even centres at opposite ends of the room / heated area, (the distance between markings will depend upon the wattage required per sqm and length of cable to be laid). To mark the floor the installer should first work out what wattage per sqm is required and thus what length or wattage cable is required. The floor should then be marked to show the desired spacing between cable runs to achieve the desired wattage per m 2 over the floor area.
3. Starting from the closest point to the thermostat/power source run the cable back and forward between the floor markings taping over the cable at the start and end of each run to fix it in place so the tiling process can be completed. If the required additional tape can be used. Or the full length of the cable can be taped over to maintain even spacing and fix the cable in place.
4. Depending upon whether you are using a Living Heat dual or single core system the other end of the cable may need to be returned to the start position. (Living Heat duel core systems do not require the 2nd end of the cable to be returned to the start point).
Below is a typical underfloor heating floor section build-up of a tiled floor.
