You Are
Bidding on New Acoustic Foam:
Kit includes (Covers 96 Square Feet):
(96) Convoluted Charcoal Egg Crate Tiles 12" x 12" x 1-1/2" Thick
"The winning bidder will receive 2 FREE gifts to complement the acoustic kit"
We vacuum pack the foam to reduce the box size. Please allow 2-3 days for it to expand to its original shape. Foam orders that are vacuum packed need to be opened right away for best results.
There will be an additional shipping charge to Canada or any international shipping outside the U.S.
MADE IN USA
(NRC) Noise Reduction
Coefficient |
|
|
|
|
|
|
|
1-1/2" Wedge |
0.21 |
0.47 |
1.03 |
1.06 |
0.93 |
1.07 |
0.88 |
1-1/2” Foam Tiles: Recommended for rooms that needs little sound deadening.
Please visit the eBay store for more stylish kits that we carry!
FEATURES: Make you room look amazing. It’s easy, and
lightweight so that it can be quickly installed and look good at the same time. With
this kit you do not have to cover the whole wall with acoustic tiles. You can
group pieces together or separate the pieces, which will soundproof your room.
MATERIAL: 2 lb Density Flame-retardant open-cell/Urethane-Ether Foam
APPLICATIONS: Residential,
Commercial, and Industrial
Flammability: MVSS 302 Flame
Tests, Flame-Retardant.
COLOR: Charcoal, The winning bidder has the option of choosing another colored
foam is 15% more in price
Our
Acoustic Wedge Kit is a wonderful product for absorbing sound waves, but do not
mistake “sound absorption” for “sound blocking.” Acoustic foam will not block
sound from going through it. To block sound you need heavy, dense material. Acoustic
foam does help to make sound waves less, and are a good solution for sound
absorption. This is why it is used to treat a room with a lot of echo or
reverberation. It helps to create an acoustically “sound deadening” effect for
rooms, with a lot of bouncing sound waves.
If
you need to sound block your room please contact us. Our heavy dense material
is 1/4" or 1/2" thick, sound Barrier that goes at the bottom of each
tile.
Installation Tips
1. If you
apply our spray adhesive glue lightly, only on the back of the tiles this will
leave a temporary bond.
2. If you
apply our adhesive glue to both the mounting surface and the back of the tiles
this will leave a permanent bond.
3. For a
stronger permanent bond make sure you spray both surfaces and allow adhesive to
dry and tacky before bonding.
4. For
clean cuts, try an electric knife instead of scissors or a utility knife.
(Scissors and utility knives usually leave a jagged edge)
5. Most
customers glue tiles with silicone-based caulk. For portability, you could
attach Velcro stripes or put double stick tape.