Our digital TMT-HC-210 Humidity control II with Day-/Nightmode with a external display is a digital hygrostat for humidification and dehumidifying, which leaves open no desires. The equipment has a air humidity-steered circuit with day and night mode e.g. to control humidifiers or dehumidifiers etc. The humidity probe is connected to the device with a 1,5m cable. A second, timer-steered circuit (time switch clock/timer), with four scene sets and minute-exact adjustment possibilities e.g. for the lighting.
The device also has an alarm function (optical and acoustic), a switching possibility of humidifiers or fan. Also you can change the hygrostat circuit sensitivity. So you can determine individually, starting from which deviation the hygrostat switches. If you choose e.g. the value 1-15 this means the humidifier will be activated only if the measured air humidity is 1-15% under the desired value. The gain is to prevent the humidifier from a continueless switching on and off. Also this helps to simulate nature given fluctuation in humidity.
All devices are attached over protected plug clutches with a maximum of 1000W. By the constant announcement of the air humidity the equipment can also be used as hygrometer. The measuring and controlling range is from 10% to 99%.
Display:
LCD Display
Measuring range:
10-99%
Resolution:
0,1
Measuring accuracy:
+/- 1%
Controlling range:
10-99% 24 Timer
Probe cable length:
150cm/75 cm (Temp)
Power supply:
220V max. 1000Watt
Power consumption:
max. 3 Watt
Weight:
690 g
Sensor cable:
95cm
Dimension:
Display: 7cm x 2,5cm Cable (Display): 90cm Multiple Socket: 20,7cm x 6,7cm Cable (Multiple Socket): 95cm
