eBay

DescriptionSpecificationsIn The BoxShipping

The MagMod MagBox 24 Octa Starter Kit available at digiDirect is a combination of the MagMod MagRing, the MagMod MagShoe for MagRing, and presents excellent value.

Contact digiDirect today or continue reading to learn more

Perhaps you have a few more questions about this package? We're here to help. We have a large stock of professional and recreational cameras available. Our staff can help you pick out the perfect device to suit your needs without breaking your budget. You can contact us today to learn more or read more about the individual components of this package below.

The MagMod MagBox 24 Starter Kit contains everything you'll need to maximize the potential of your Speedlight. The kit includes the MagRing that will support either one or two speedlights and a MagShoe that allows you to handhold the setup or mount it to a stand. To use with two speedlights, the purchase of a B&H# MAMMGRIP02 for each flash unit is required.

MagMod MagBox 24 Octa Softbox 60 cm

Featuring a one-piece design and a magnetic base for very fast set up and breakdown, the 60 cm MagMod MagBox 24 Octa Softbox is compatible with Profoto, Bowens, Elinchrom, or Paul C. Buff strobes with optional dedicated adapters and one or two speedlights with the addition of the MagGrip that is sold separately. One of the MagBox's most noticeable features is its evenness of output from edge to edge. Remarkably, this is done without an internal baffle and without exhibiting a hot spot. For personal expression, there are two available gel kits with a variety of colors that slip into the softbox's integrated gel holder, while there's also a CTO set for the conversion of your light source to tungsten balance. Finally, sold separately, MagMod's FocusDiffuser functions like a grid and a lens combined, allowing you to control the spill and direct the light while increasing its output.

Key Features of the MagMod MagBox 24 Octa Starter Kit

MagBox 24" Octa Softbox
MagShoe - for Hand Holding or Stand
MagRing - Supports 2 Speedlights

Magnetic Attachment

Magnets inside the base of the MagBox make attachment fast, silent, and super strong. Even if you tilt your softbox at a deep angle or (for some reason) shoot inside a wind tunnel, the MagBox and the MagRing are staying put.

Easy Set-Up and Tear Down

The MagBox is one solid piece. Pop it open with an easy click. With magnets in the base, you can throw it onto your MagRing in a second. When you're ready to remove the MagBox from the MagRing, simply press the Magnetic Field Disrupter. Then fold up the MagBox; it collapses in one neat, portable piece and can be stored safely in the MagBox Case.

Speedlight- and Strobe-Compatible

The versatile MagBox can be used with one or two speedlights - any flash that has MagMod's patented MagGrip installed will work. Or use one of the available adapters to mount your Profoto, Bowens, Elinchrom, or Paul C. Buff strobe.

Obstruction-Free Design

The calculated design of the MagBox 24 Octa distributes light evenly and without a hotspot, the reason why this softbox is devoid of an internal baffle. It can be used with one or two speedlights. The MagBox provides clean light quality and optimal output.

MagMod MagRing

The MagMod MagRing is a lightweight universal Speedlight mount that accepts up to two speedlights that have been outfitted with MagMod's MagGrip (MagGrip not included). The MagRing features a cold shoe mounting foot and can mount to a MagMod MagShoe for handheld or stand-mounted use. Magnetic attachments are at the heart of the MagRing and are used to hold MagMod's MagBox softbox. Magnets also secure your speedlights when mounted with the MagGrip, and the MagRing incorporates locking doors for further security.

Key Features of the MagMod MagBox 24 Octa Starter Kit

Neodymium magnets inside the MagGrip (not included) allow speedlights to attach securely to the MagRing without tools or locking knobs.
With your speedlights magnetically attached to the MagRing, close the rear latching doors for additional security.
The MagRing system is incredibly fast as it uses magnets and latches to secure your speedlights. This tool-less mounting method makes for rapid setup and breakdown.
MagRing works with MagBox accessories.

MagMod MagShoe for MagRing

The MagMod MagShoe for MagRing is a lightweight ergonomic holder for your MagRing flash holder. The MagShoe can be mounted to a stand with a 5/8" pin or easily carried handheld, and it accepts either a flash or the MagRing using a cold shoe mounting system. It is designed to operate with only one hand, leaving your other hand available to hold your camera, which allows you to mount your flash or MagRing hand

The single-handed operation extends to the tilt function, which is controlled by a simple trigger that you squeeze to release the lock. This allows you to have a secure grip on the MagShoe while locking or unlocking it with the same hand that is holding it secure. Releasing the trigger engages the tilt lock, which allows the MagShoe to support your MagRing, two flashes, and the MagBox softbox. It integrates an umbrella mounting hole with a lock, allowing you to create that familiar soft look. The plastic exterior of the MagShoe is gentle on your hands, and will not accidentally trigger your flash via its hot-shoe mounting foot.

Key Features of the MagMod MagShoe for MagRing

The built-in locking lever is designed to be locked or unlocked using only one hand. It features an integrated locking ring that locks your flash or MagRing in place without using the locking ring on your flash
When mounted on a stand, you can tilt the MagShoe forward or back over a range of 155° by simply squeezing the trigger and tilting the unit. Releasing the trigger re-engages the tilt lock. this is a single-handed operation that does not require tightening or loosening locking levers or knobs.

MPN - MMBOX24KIT01
GTIN - 854211005374

Shape	Octagon
Interior	Silver
Requires Speed Ring	Yes, Not Included
Accepts Grids	Yes
Removable Front Face	Yes
Light Loss	1 Stop
Material	Fabric, Fiberglass
Circular Dimensions	61 cm (Open)

MagMod MagBox 24 Octa Starter Kit
Case
MagMod MagRing
MagMod MagShoe for MagRing

When will my order ship?

If payment is received by 11:00am item will be shipped the same day.
Payments received after 11:00am will ship the following business day

Can I cancel or return my order/delivery?

We begin processing your order as soon as it is placed, once your order progresses it may be too late to cancel. However, once you’ve received your order, you can return your purchase within 14 days, provided your return is in accordance with our returns policy.

Can I change my delivery address?

Once you submit your order we get to work straight away getting it ready for you, unfortunately this means we are unable to amend the delivery address once your order is submitted with us. We only ship to address indicated in the PayPal record.

What will happen if I miss the delivery?

If our couriers can find your address but you aren’t there, don’t stress, you will receive a post office card with all the information you’ll need to go down to your local post office to pick up your order at a time that suits you.
Your order will remain waiting for you at your local post office for 10 days before being sent back to our warehouse. If your order is not collected within that time, re-delivery charges will apply.

Does digiDIRECT have a store?

We have stores in the Sydney CBD, at Westfield Bondi Junction, Westfield Miranda, Brisbane CBD, Melbourne CBD and in Cannington (Perth). Our modern stores provide ideal opportunities to view a vast range of products and to meet our friendly staff and management in person.

Does digiDIRECT have a returns policy?

Under Consumer Protection Law, we do not accept returns for "change of mind" or if you order incorrectly. However, damages or faults will be treated on a case-by-case basis. At digiDIRECT, we are committed to providing our customers with the best service and support.
Shipping and handling charges are non-refundable.

What if we made an error on the listing?

Whilst every effort is made to ensure that all details, descriptions, and prices that appear on this Website are accurate, errors may occur. If we discover an error in the price of any goods which you have ordered, we will inform you of this as soon as possible and give you the option of reconfirming your order at the correct price or cancelling it. If we are unable to contact, you within 36 hours we will cancel the order.

Do digiDIRECT products come with official Australian manufacturer's warranty?

Absolutely. Warranty is 12 - 24 months (dependent upon manufacturer) back-to-base official Australian warranty (Refurbished products excepted - 6 months). We are among the few on-line suppliers with direct accounts with the Australian distributors of leading digital brands, including Canon, Nikon, Sony, Panasonic, Olympus, Pentax just to name a few. We do not Grey Import any of our products.