A water-based acrylic paint with a reversible photochromic effect designed for customizing sneakers made of natural, synthetic and textile grain leather. Paint without direct access to light will remain transparent, but when in contact with sunlight or UV light, the paint will change to a defined color.

Photochromic paint for painting sneakers with a brush, sponge or airbrush. The coating exhibits both wet and dry friction strength. It is a flexible product and resistant to bending resulting from the use of footwear / material.

The product complies with updated health, safety and environmental regulations. A water-based formula is not considered to be a hazardous product to the consumer or the environment. Probably the only acrylic paint of this type on the market!

Included:

Paint

Paint Brush

Application sponge

Paint mixing container

Instruction

How to use:

Clean the sneakers with the Sneakers Cleaner using the Sneakers Brush or the Tarrago Shoe Duster. For best dyeing results, use the Tarrago Conditioner.

2. Before painting, stir the content with the brush enclosed, until a homogeneous color is obtained.

3. Customize your Kicks:

3.1. Use the Sponge included to cover larger surfaces. With the semi-wringing Paint brush, paint one corner of the sponge and gently rub over with circular moves on the Sneakers.

3.2. Use the Paint Brush included for small details or customization.

3.3. Use an Airbrush. Use the neutral base (50% neutral base and 50% Photochromic Paint), to dilute the paint and maintain its properties.

​It is better to apply three layers. After drying the first layer of paint (1 hour), apply a second layer, repeating the operation to match the entire color. To accelerate the dyeing process between layers, use a hair dryer with caution (30 cm. minimum distance). Apply the paint to the white surface. If the surface is not white apply the Sneakers Paint nº 1 (white color) previously.

4. For optimum drying, let it dry for 12 hours.

5. Once the process is finished, wash the Sponge, the Paint Brush or the Airbrush with water to prevent them from drying out.