eBay

Modell ONE :6.5 PS & 2-Takt Water-cooling system

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon

2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed

3.It can be marched with inflatable boats, rubber boats or fishing boats

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat

Über die Zertifizierung:

Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.

The Hangkai 6.5 hp 4-stroke provides all the power you need for motoring in a small craft.

This engine does that as well as providing fuel efficiency second to none and a newly redesigned

carrying handle and holding grip make it convenient to transport! With all of this available at a

competitive price, it is no wonder this little outboard receives so much attention and praise!

Brand: HANGKAI

Displacement: 123CC

Gear ratio: 2.08(27:13)

Cylinder: 1

Max.Output(kw): 4.8

Max.speed(r/min): 5000-6000

Gear Positions: F-N-R

Packing size: 114x64x41cm

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 26/31.2

Bore x Stroke(mm): 59x45

Recommended Propeller range: 3 -7.8"x8"

Recommended Lubricant: Four Stroke Lubricating oil

Mixing ratio: Pure gasoline

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3x34.3x103.9

Standard fueel tank capacity: 12L

Optional fuel tand capacity: /

Short shaft ：40cm

Bonus accessories:

brochures, tubing, cotter pins

Pump impeller, start rope, start key

12 liter fuel tank, tool kit, spark plug, cylinder head pad

Modell TWO :6 PS& 2-Takt Water-cooling system

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

Über die Zertifizierung:

Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.

Technical Parameters

Dimensio:

Overall length 1040mm(40.9 in)

Overall width 872mm(34.3 in)

Overall height 332mm(13.1 in)

Transom height 44CM(17.3 in)

Performanc:

Full throttle operating range 5000-6000r/min

Maximum output 4.4KW/6HP

Idling speed ( in neutral) 1000±100 r/min

Engine:

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive uni

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)

Modell THREE :7 PS & 4-Takt Air -cooling system

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Must read before use!

Four stroke 7 hp:

Firstly,Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly,Fill engine oil don't exceed the head of the pattern.

Forthly,Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.

Then,turn the accelerator gets up to 50% and rapidly pull the starter line.

After the motor start ,please turn the gear to minimum before put another gear.

Otherwise, the gearwheel will be broken if you put high gear.

Universal motors, high performance, reliable quality

· Perfect match inflatable boats, fishing boats, sailboats, and small yachts.

· Economical and compact structure. Durable, lightweight and anti-corrosive construction.

· Maneuverable and safe twist grip throttle control.

· Suitable for: Freshwater and saltwater

· One year warranty covers the motor, to provide parts free

Type: 4 stroke 7 horsepower

Capacity:196CC

Transmission ratio: 2.08 (27:13)

The number of cylinders: 1

Maximum speed: 4500-5500

Maximum power: 5.1 kW /7 HP

Shift position: clutch control

Package volume: 120x60x42.5 cm

Ignition system: TCI

Cooling system: air cooling

Starting method: hand start

Refueling: No. 93 gasoline

Propeller size: 3-7 1/2''x5''

Gear position:F-N-R

Control system: Tiller control

N.W./G.W.:26.7/31.7kgs

long shaft ：50CM

Recommended Lubricant：4 stroke lubricant oil

Trim and tilt system:Mannual tilt

Standard fuel tank capacity:1.4L/within

Modell FOUR :4 PS & 4-Takt Air -cooling system

Über die Zertifizierung:

Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.

Type: 4 stroke 4 horsepower

Capacity: 52cc

Transmission ratio: 2.08 (27:13)

The number of cylinders: 1

Maximum speed: 4000-5000

Maximum power: 2.8 kW /4 HP

Shift position: clutch control

Package volume: 95x40x30 cm

Ignition system: CDI

Cooling system: air cooling

Starting method: Manual start

Refueling: No. 93 gasoline

Propeller size: 7 1/4X7-A

The maximum fuel consumption: 1.4 liters / hour

Recommended Lubricant:4 stroke lubricating oil

Mixing ratio:Pure gasoline

Trim and tilt system:Manual Tilt

Start-In-Gear protection/clutch feature prohibits prop rotation while idling

convenience

without reverse gear

Features 360 degree steering rotation for reverse without gear shifting

Cooling system: air cooling

Easy pull off engine cover with push button latch for instant motor access

Modell FIVE :3.6 PS & 2-Takt Water-cooling system

Über die Zertifizierung:

Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.

SKU:OT-ML-132

1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling

2.Lift/Tilt feature for shallow water operation and convenience

3.Features 360 degree steering rotation for reverse without gear shifting

4.Superior engine water cooling system for improved engine performance

5.Easy pull off engine cover with push button latch for instant motor access

Product Description

Features: Features 360 degree steering rotation for reverse without gear shifting .

Start-In-Gear protection/clutch feature prohibits prop rotation while idling .

Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved

performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency .

Twist grip throttle handle and engine stop button for improved response .

Superior outboard anti corrosion system and anodes for increased durability .

Durable cast aluminum construction for superior corrosion protection .

Through the prop exhaust outlet for decreased noise and pollutant .

Heavy duty lightweight aluminum cast propeller is standard equipment

Shipping Weight: 21.4 pounds

Modell SIX :3.5 PS & 2-Takt Water-cooling system

Über die Zertifizierung:

Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.

SKU：OT-028

Description:

Overall length:92CM

Overall widteh:36.5cm

Overall height:22cm

Transom height:42cm

Full throttle perating range:4000-5000r/min

Maximum output:2.5kw(3.5HP)

Speed:10km/h

Type:2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling

back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve

180 and the operation handle face back, the boat can fall back to drive.

Announcements

After in the sea water or turbid water cruising

1.Use the fresh water cleaning the outboard motor

2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,

from that will cause the engine breakdown.

4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.

5.Before the long term storing,you should run out of the gasoline in the fuel tank.

Please Note:

There are two pull starter included in the parcel(one is the machine, another one for spare)

We don't supply wearing parts (pull starter)for free.

Modell Seven :12v 45lbs

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Note: The battery is not included!

Must Read before use!

Firstly,Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly,Fill engine oil don't exceed the head of the pattern.

Forthly,turn the throttle to the start up and turn the accelerator gets up to 50%.

Then,Rapidly pull the starter line.

After the motor start ,please turn the throttle to running state.

Then, it can be operated now.

Product Specifications:

Short shaft : 40cm

Brand: Hangkai

Model: ET45L

Thrust (kg): 20

Seep control: F5-R2

Motor type: Brush motor

Rated voltage (V): 12

Rated speed (R / min): 1300

Rated current (A): 52

Rated power (W): 480

Control handle: telescopic

Maximum speed (km / h): 8

Noise DB: 50db

N.W./G.W.(kgs) 9/10

Propeller model (in): 3 leaves / 10.6

Packing size (cm): 107 * 55 * 17.5

Battery Type Recommended:

Choose 120A battery, the maximum power of 3 hours sustainable operation.

Package Included:

· 1x tugged motor

Modell Eghit:12v 80lbs

Note:
Batteries not included!

Please read the instructions before use.

Features:
1.Telescopic handle
Equipped with retractable handle, remote control is more convenient
2. Power wiring
All-copper inner core connecting wire is waterproof and anti-corrosion
3. High-quality main pole
Glass fiber composite main rod, light weight, good rigidity, sufficient toughness, acid resistance, alkali resistance, salt resistance and other characteristics
4. Bracket
Reinforced nylon material has the characteristics of light weight, firm structure and resistance to breakage, corrosion resistance and acid and alkali resistance. It is suitable for use in seawater. There are ten levels of angle adjustable motor work scenes. It is suitable for special water environment and has anti-collision settings, which greatly reduces the probability of underwater stones hitting the motor.
5. Nose
High-performance all-copper motor underwater motor system, with high motor efficiency, less heat loss, more power saving, and longer life

Specification:

Thrust (kg): 28kg
Main pole length: 36inch
Input voltage: 12v
Net weight/Gross weight: 10/12kg
Output power: 800w
Horsepower: 1.2HP
Suitable number: 6-8 people
Packing size: 130*48*17cm
Speed regulation: forward 5 gears, backward 3 gears
Handle length: 190mm (can be stretched to 285mm)
Motor type: brush
Number of propeller blades: 3
Traction force: 1850kg
No-load speed: 1900r/min
Control method: manual control
The fixing method of the hull and the propeller: suspended
Power mode: motor drive (battery needs to be purchased locally)
Applicable objects: for boats, inflatable boats, kayaks, inflatable boats

Recommended battery model:
Choose a 12v 30-120AH battery, and choose the corresponding ampere hour battery according to the usage time

Packing list:
Manual + wrench accessories + fan blade + machine

Modell Nine :2.3PS & 2-Takt Water-cooling system

Note: Before using the motor, please add gear oil to the gear and replace the gear oil after the running-in period (10 hours). (If you don't know how to handle it, please contact us). Please do not equip our outboard engine with gear oil. Please prepare it yourself. Remember to refuel on the gear before use!!!

About certification:

We can only provide CE certification, no other certification can be provided, thank you for your understanding.

Please note:

1. About noise: All gasoline engines are very noisy. At present, we have not tested decibels, but the noise is the same as that of motorcycles, so this is normal.

2. The machine itself is light in weight and can be used on board no more than 100kg, with a load of 4 people, but the speed is definitely different when people or 4 people. Please pay attention to customers who have high expectations for speed.

3. Can march with inflatable boats, rubber boats or fishing boats.

4. Necessary: You must prepare a boat motor bracket or hanging plate on board.

Two strokes of 2.3 horsepower are controlled by the handle and the handle is operated by the clutch. No neutral, only idle mode or low speed mode

Strictly for professionals only

Please note:

We do not provide consumables for free (such as pulling the starter).

If you want to buy, please contact us

Short axis: 750MM

Description:

Full throttle operating range: 8500r / min

Maximum output power: 2.3HP

Speed: 10 km/h

Type: 2 strokes

Ignition System: CDI System

Start the system: manually start

Staring at the carburetor system: choke start

Engine and propeller ratio: 2:1

Recommended fuel: ordinary unleaded gasoline

Fuel ratio: 25:1 (please note this version and ignore the manual on this)

Gear ratio: 27/13

Top speed: 10 km / hour

Built-in fuel tank: 0.85L

Fuel consumption per hour: 1.5 liters

Notice:

After cruising in sea water or drowning

1. Use fresh water to clean the outboard motor

2. Circulate the engine at moderate speed .

3. Do not leave the outboard motor outside until you have completely cooled the water. Otherwise the water cam enters the cylinder through the exhaust port.

From there it will cause an engine failure.

4. The engine should be stored in a dry and ventilated place to avoid direct exposure to the sun.

5. You should use up the gasoline in the tank before long-term storage.

Modell # 2 :4hp & 4-Takt Air-cooling system

Modell: 4,0 PS Strahlpumpe

Verdrängung: 55cc

Übertragungsverhältnis: 2,08 (27:13)

Anzahl der Zylinder: 1

Drehzahl: 4500-5500 U / min

Leistung: 2,9 kW

Gangschaltung: Kupplung

Verpackungsvolumen: 95 * 42 * 29 cm

Zündanlage: CDI

Kühlsystem: Windkühlung

Steuerungssystem: Pinnensteuerung

Startmodus: manueller Start

Betankungsmethode: Bleifreies Benzin Nr. 92 wird empfohlen

Bruttogewicht / Nettogewicht: 13 / 9,7 kg

Bohrung * Hub: 44 * 33 mm

Empfohlenes Motoröl: Viertakt-Motoröl

Neigungswinkelsystem: manuelle Neigung

Größe: 855 * 365 * 220 mm

Standard-Kraftstofftank: eingebauter 1,4 l

Angepasste Heckplattenhöhe: 440 mm

Vorsichtsmaßnahmen:

1. Verwenden Sie ein Viertakt-Spezialmotoröl (Automobil- und Motorradmotoröl).

2. Öl gemäß der Skala auf dem Ölmessstab (der rotierenden Abdeckung) nachfüllen, nicht mehr oder weniger nachfüllen;

3. Der Kraftstofftank des Viertakt-Außenbordmotors kann nur mit reinem Benzin Nr. 92 gefüllt werden.

4. Drücken Sie den Öler vorsichtig auf den Vergaser, bis das Öl oben in die transparente Ölleitung fließt.

5. Maschinen unter 6 PS haben keinen Rückwärtsgang und können sich um 360 Grad drehen, und der Maschinenkopf dreht sich um 180 Grad, um einen Rückwärtsgang einzulegen.

6. Die Einlaufzeit beträgt ca. 10 Stunden oder einen Monat. Fahren Sie während der Einlaufzeit nicht mit Vollgas.

7. Wechseln Sie das Motoröl und das Getriebeöl nach der Einlaufzeit. Die zweite Wechselzeit beträgt etwa 100 Stunden oder sechs Monate später.

8. Die Maschine muss bei Nichtgebrauch an einem zuverlässigen Ort aufgestellt werden.

Packliste:

Anleitung + Toolkit + Zündkerzenhülse + Trichter