The door access system comes with RFID card keypad reader, DC 12V 3A power supply and waterproof token key ring, they are widely used for entrances and exits at offices, factories, hotels, home...etc.
Packing List (bulk pack):
- 1 x RFID card reader keypad
- 1 x Power supply
- 1 x Bolt lock
- 1 x Door bell
- 1 x Exit buton
- 10 x RFID keychain
NOTE:
- Doesn't need to connect on the computer or control board, it can work alone.
- It supports EM only, not support special encrypted cards such as HID, Cobra, APCiK..etc.
- Wire connection please refer to RFID reader and power supply manual
RFID Reader Features:
- Contactless RFID transponder technology with power off data protection function
- Support offline work and full programming from the keypad
- Support card, password, card+password to open door
- Support master cards to add or delete user cards
- Support the switch for opening the door
- Elegant appearance with clear numbers, convient to use
- Voltage: DC 12V
- Current: <100mA
- User capacity: 1000 users
- PIN capacity: 1
- Frequency: 125KHz
- Support: Card, PIN, card + PIN
- Valid password: General 1 set
- Card type: EM, ID
- External reader: Not support
- Distance: 1 to 15cm
- Size: 120 x 78 x 22mm (4.72 x 3.07 x 0.86 inch)
- Weight: 123g (0.27 lb)
Power Supply Features:
- Power supply switch is built-in EMI filter
- 100% full load burn-in test
- Low output ripple and noise
- Over load/over voltage/short circuit protection
- Based delay control circuit, lock time can be in 0 to 15 seconds
- Set NC / NO output, can control various types of electric locks
- Can reduce the load of access controller, save wiring to reduce the hidden trouble
- Input voltage: AC 110V to 240V, 50Hz to 60Hz
- Output voltage: DC 12V, 3A
- Output contact: Access Control, Electric Lock, Release Button
- Time relay: 0 to 15sec
- Standard design: Steel material, Painted
- Size: 120 x 95 x 38mm (4.72 x 3.74 x 1.49 inch)
- Weight: 326g (0.72 lb)
Bolt Loack Features:
- This electric bolt lock is made from durable and high aluminium alloy material, durable for use
- Lock while supplied with power, and unlock without power
- Sensitively and response quickly, low operational and standby current
- With no external interference, making it more stable and safer
- Suitable for wooden door, metal door
- Material: Aluminum
- Voltage: 3A/12V DC
- Delay: 0/ 3/ 6 second
- Size: 150 x 34 x 28mm (5.9 x 13.4 x 1.1 inch)
- Weight: 454g (1.0 lb)
Door Bell Features:
- Speaker for door bell, must use with door system with door bell function
- Power input is 12V, Red for positive, Black for negative
- Green and Yellow wire connect to Bell connector on door system
- Bell ring is "Ding Dong" twice
- Size: 65 x 90 x 25cm (2.36 x 3.54 x 0.98 inch)
Exit Button Features:
- User friendly, push for openning the door
- compatible with most access control/ locking devices
- Current rating: DC 36V/3A
- Mechanical life: 500000 tested
- Material: Hard plastic
- Size: 85 x 85mm (3.34 x 3.34 inch)
- Weight: 54g (1.90 oz)
Key FOB Features:
- Compatible with all door entry system to gain access
- No external power required
- Detecting distance: 3-10cm
- Color: Blue
- Size: 36 x 26 x 6.6mm (1.41 x 1.02 x 0.26 inch)
- Weight: 10 x 7.7g, 77g (0.17 lb)