Liqui Moly - PAG 46 Air Con Oil with UV Dye Fully Syn. for R134a - 250ml - 4083
Liqui Moly
PAG46 Air Con System Oil
250ml
#4083
Fluorescent, fully synthetic air conditioning system oil based on polyalkylene glycol is highly compatible and miscible with R134a.
Not suitable for refrigerant circuits that are filled with R1234yf refrigerant and not for hybrid and electric vehicles with electrically driven compressors.
It meets the requirements placed by the prevailing air conditioning compressor manufacturers.
Complies with ISO VG Class 46 acc DIN 51519.
Developed for air-conditioners filled with R134a.
It is used to lubricate, seal and cool the sliding and rotating parts in the refrigerant circuit.
Comply with the vehicle or compressor manufacturer’s instructions.
Liqui Moly PAG Air Conditioning System Oil 46 is used to wet the seals of refrigerant circuits before installation as well as being used to supplement refrigerant oil used in the workshop during repairs. Liqui Moly PAG Air Conditioning System Oil 46 is also used when refilling the air conditioning systems of passenger and commercial vehicles using Refrigerant Type R 134a.
To wet seals during assembly, apply the oil with a brush to ensure that the system is well sealed. To top up or replace the refrigerant oil in passenger or commercial vehicle air conditioning systems, it is poured into the special filling cylinder and then added to the refrigerant circuit via the air conditioning system filling device. If there is a leak in the refrigerant circuit, the refrigerant lines of the vehicle can be examined using a UV lamp in a dark room. The UV light will render the yellow fluorescent color in the PAG oil escaping at the leak visible.
Note:
After use, always reseal the oil to
prevent it from absorbing moisture from the ambient air. PAG air
conditioning oils must not be mixed or disposed of with waste oil of
known origin, e.g. motor and transmission oils. PAG air conditioning
oils must be collected separately and disposed of in accordance with the
waste code (see safety data sheet).
Viscosity at 100 °C 10,7 mm²/s
Shelf life 24 Monate in original verschlossenen Gebinden / 24 months in original sealed containers
Color / appearance hellgelb / light yellow "
Base Polyalkylenglykol (PAG) / Polyalkylene glycol (PAG)
Water content 0,05 %
Pour point - 49,7 mm²/s
Viscosity at 40 °C 45 mm²/s
Odor charakteristisch / characteristic
Form flüssig / liquid
Viscosity index 213
Flash point > 200 °C
Density at 20 °C 1,0 g/cm³
Wear-test, 4-ball apparatus 0,53 mm ASTM D4172
Germany Quality Engineered Engine and gear oils, oil and fuel additives, auto-care products, chemical problem needed by the trade, workshop and industry.
We are dedicated to ensuring the highest possible quality service to our customers.
Click to expand the tabs below to read more about our policies.