MS-B1 CSR8675 Bluetooth 5.0 Receiver DAC Preamplifier Headphone Amp Assembled + Power Supply
Version Introduction:You
will get items in Black. The functions of the Black ones are the same
as that of the Sliver ones shown in pictures. The pictures below are for
reference only.
Functions:This Bluetooth receiver
uses CSR8675 Bluetooth receiver chip, supports Bluetooth 5.0, and is for
APTX-HD/LDAC high-quality lossless music transmission. It is separately
decoded with PCM5102, paving the way for good sound quality.
Selected
HiFi devices and repeated optimization of circuit. It has two outputs:
line (back-end RCA of the device) and preamp (3.5MM headphone port on
the front panel). You can connect it to power amplifiers or headphones
according to your needs. If you have certain requirements for Bluetooth
music, you might as well try this small device.
Features:- Bluetooth 5.0 lossless transmission.
- As a decoder + a preamp and headphone amplifier.
-
CSR8675 Bluetooth chip supports for APTX-HD and LDAC HD lossless
formats, and ultra-high sampling frequency, greatly improving sound
field and resolution.
- For LDAC UHD lossless format. Its sampling
rate reaches 24bit 96Khz, which is twice that for APTX-HD. Sound field
resolution is greatly improved.
- For APTX HD HiFi Decoding: Audio
technology can ensure that wireless Bluetooth devices can provide HD
audio. The technology can protect audio data during audio transmission,
providing a listening experience better than that of CD. Supporting for
aptx-hd, you can enjoy immersive listening quality when using wireless
devices.
- PCM5102A Decoding Chip: PCM5102A is used for independent
decoding, which greatly improves sound analysis and layering, supports
24Bit audio DAC, high-frequency sound is not harsh, and low-frequency
sound is clean.
- Widely Used: As long as your mobile phones, tablet
PCs, etc. have Bluetooth, you can wirelessly connect with the decoder to
your active speakers, amplifiers or mixers. Let you easily enjoy the
convenience brought by wireless!
- Circuit with HiFi Design: HiFi
materials are used in decoding periphery. Op amp 5532 is used for
pre-amplification. Multiple independent regulated power supplies. Blue
capacitors for Philips. Audio channel uses imported MELF resistors. Dial
potentiometer made in Japan and relay for OMRON. Unique chip provides
boot and shutdown protections.
Package Included:- 1 x Set of Bluetooth Receiver
Note:
- It is assembled and ready to use.
-
Due to manual measurement, the size picture bellow is for reference
only. Thank for your understanding! The dimensions exclude the sizes of
protruding parts.![](https://www.thanksbuyer.com/image/catalog/67779/67779-01.jpg)
1. POWER: Power switch.
2. POW: Power indicator.
3.
BLU: Bluetooth state indicator. (It flashes quickly when there is no
connection. It flashes slowly or is always on for successful connection)
4. VOL: Volume adjustment. (Turn to the left side to turn down. Turn to the right side to turn up)
5. HEADPHONE: 3.5MM headphone jack. (As a preamp output, it connects to pure amplifiers)
![](https://www.thanksbuyer.com/image/catalog/67779/67779-02.jpg)
1. BLUE TOOTH: Bluetooth antenna port.
2. R-OUT-L: RCA analog output. (Connect power amps, active sound boxes, etc.)
3. DC-12V: DC power supply input interface. (DC 12V is recommended)
![](https://www.thanksbuyer.com/image/catalog/67779/67779-03.jpg)
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
-
For remote regions, we will charge your extra shipping costs. Usually
it cost about 35USD-50USD. We will contact you after your payment.
Thanks for your understanding.
Return Terms
1.
If you receive defective item, please kindly notify us within 14 days.
We will guide you the returning instruction for replacement or refund.
2.
If you purchased in improper condition, please NOTE that the sipping
and handling fee will not be refund, all return shipping fee should paid
by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1.
Import duties, taxes, and charges are not included in the item price or
postage cost. These charges are the buyer's responsibility.
2.
Avoiding some unnecessary trouble, please check with your country's
customs office to inform us what we should declare its value before
shipping.
Feedback
1.
If you are dissatisfied for any reason, please don't be quick to leave
us neutral or negative feedback. We work hard to make sure EVERY
CUSTOMER 100% SATISFIED and resolve any problem for you and always leave
positive feedback to all our customers.
2. If you are satisfied with
the product you received, please kindly leave us a positive feedback
and 5 star DSR. If there is any problem of your order, please feel free
to contact us firstly, we are responsible and credible seller, will
follow it for you asap.