Briwax Toluene Free Wax Polish Dark Oak  370g Clean & Polish to a Natural Sheen

Briwax Toluene Free Wax Polish Dark Oak has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching Briwax shine.

Intended Use: Suitable for use on most wooden surfaces. This product is not recommended for use in areas where it will come into contact with water.

Colour: Dark Oak
Size: 370g 

How to Use Briwax Original Furniture Wax

Video will open in a new window
Using the eBay App? Paste link into a browser window:


Usage Instructions: 
Preparation: The surface must be smooth, clean and dry. Briwax may be used on previously waxed surfaces. For best results, clean surface first with Briwax Furniture Cleaner.
Application: Apply using a lint free cloth or Briwax 0000 Steel Wool, thoroughly working the wax into the grain. When dry buff to desired finish with a soft clean cloth. Note; best results are obtained if the wood has previously been coated with Briwax Shellac Sanding Sealer.
Coats: One coat is usually sufficient, but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying. Re-coating Time: If required, re-apply after a few minutes.
Application Temp: Ideally 15-25ºC.
Maintenance: Re-apply as required.
Compatibility: Compatible with all types of wood finishes. If in doubt or when waxing antiques or pre-finished furniture, check compatibility first. For best results and to prevent a blotchy appearance on porous woods, seal untreated surface with a varnish, finishing oil or sanding sealer.
Clean-Up: Hands and application cloth may be cleaned in warm soapy water

Briwax Original Wax Polish is NOT recommended for use in areas where it will come into contact with water. Above 20°C, Briwax Original Wax Polish will soften and liquify. Replace lid, put in a cool place and it will return to its original state.