COLOR: Chrome
For use with( Years):
Ford F150, F250, F350 (2004-2016)*
*Note-
Prior to ordering, measure your current emblem. This replaces all Ford
large oval emblems located at the center of the tailgate.
**Important-
This will not work as a replacement for OEM systems! If your truck has
an existing OEM Backup Camera and you are looking for a replacement,
this will not work!!
Installation:
This
backup camera can be connected to any aftermarket monitor with a Yellow
RCA input. Typically the factory emblem is attached to your truck with
double sided tape. Use a heat gun, at a low heat setting, and use a
piece of floss between the emblem and tailgate to remove the old emblem.
On some older models, you may need to drill a small hole in your
tailgate to run the wiring through. Most 2006+ models come with the
holes already drilled.
**Warning –
the product may require modification to the tailgate. To check, remove
the Ford Emblem and see if your tailgate has the cutouts for the
mounting holes. If you do not see mounting holes behind the emblem, you
will need to cut the tailgate to mount this backup camera.
Description:
This
is an Genuine Ford Emblem (part #CL3Z-9942528-B), aftermarket Chrome
base, and backup camera. For the power supply, you can connect it to
any 12V power source. For example, if you wanted the camera to always be
on, you can connect it to a 12v source that is on all the time, or if
you only want it when you reverse you can connect it to the reverse
taillights. Includes video cable 8 meters long to reach your monitor.
*Ford Genuine mounting screws and clips included!
Camera Specs: