YOU ARE LOOKING AT A Soundtraxx {885020} Tsunami 2 TSU-4400 for BALDWIN & OTHER Diesel Engines. The Tsunami 2 BALDWIN & OTHER Diesel is preloaded with the following prime mover sounds BALDWIN VO; BALDWIN 608NA; BALDWIN 608A; BALDWIN 606NA; Rio Grande Southern Galloping Goose; Dual Whitcomb; Fairbanks-Morse; GE GTEL UP "Slab Side"; GE GTEL UP "Veranda"; GE GTEL UP "Big Blow" A unit; GE GTEL UP "Big Blow" B unit & Cummins QSK19C x3 GenSet.

TSU-4400 Digital Sound Decoders

The TSU-4400 is a universal-style, 4-amp Digital Sound Decoder with 6 function outputs. Designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. It includes an onboard connector for adding a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

Specifications
Dimensions:	69 x 30.5 x 14mm	Max. Motor Stall Current:	4A
Max. Function Current:	400mA (each output)	Function Outputs:	6
Audio Amplifier:	3 Watts, 8-Ohm Load	DCC Track Voltage:	7.5V – 26V

Speakers
The Tsunami2 line is equipped with powerful new amplifiers; therefore, it is important to *choose a capable speaker* to use with these decoders.

Tsunami2 Software Version 1.2 Update

Bring more realism to your layout than ever before with our amazing new diesel features!

New Software Version 1.2 Diesel Features:

Prime Mover Pitch Shift
Auxiliary HEP Generator
Straight-to-Idle
True-Idle

New GenSet Specific Features:

Cummins QSK19C x 3 Prime Mover Sounds
Individual polyphonic sound channels for
all 3 prime movers
Unique volume & alternate mixer controls
for each prime mover
Correct Blower Motor Fan Sounds
Dynamic Braking supported for “GenSet II” type locomotives

Prime Electronic Bell
Leslie S3LR & RS3K Airhorns
Electronic Air Dryer

New GTEL Specific Features:

GE GTEL UP "Slab-side" sounds
GE GTEL UP "Veranda" sounds
GE GTEL UP "Big Blow" sounds (A & B units)
Cooper-Bessemer hostler motor for the
"Big-Blow" A unit
Industry exclusive "backfire" sound effect
Manually start/stop the Turbine engine with
a function key
Turbine Timeout Feature
Speed Limiting Features

Diesel Features

Tsunami2 diesel sound decoders are full of new features including over 50 sound effects including engine startup and shutdown, engine prime mover through all eight notches, Straight-to-8, HEP mode, 13 bells, over 40 airhorns, 4 air compressors, dynamic brakes, radiator fans, brake squeal, and more!

Each diesel version (EMD, GE, etc.) contains up to 9 manufacturer specific prime movers (Turbo, Non-turbo, etc.)

First ever Diesel Dynamic Digital Exhaust (DDE) for a more authentic operating experience

Startup, shutdown and exhaust through 8 notches

Automatic or manual notching

Functioning dynamic brake with variable load sound and adjustable braking rate

Over 40 air horns
Selectable compressors, bells, and couplers

First ever Fireman Ed is ready to work on the locomotive, with general service, cab sounds and more!

Clickety-clack, fueling, and authentic cab chatter add realism
Prototypically correct HEP modes and steam heat for authentic passenger train operations

It is compatible with the NMRA DCC Standards and Recommended Practices.

TSU-1100 Universal Digital Sound Decoder Small 1Amp Tsunami2 Digital Sound Decoder measuring just 27mm X 10.5mm X 5mm

IT IS NEW IN BOX AND RETAILS FOR $188.95. THANKS FOR LOOKING AND GOOD LUCK.