eBay

NeilMed Sinus Rinse 60 Sachets kit & 240ml bottle kit natural saline sinurinse

NeilMed® SINUS RINSE is an easy squeeze bottle system that allows you to deliver the saline solution with positive pressure to clean the nasal passages thoroughly, while maintaining your head in an upright position. You have complete control of the pressure and volume of solution, ensuring a gentle, soothing and therapeutic experience. Daily rinsing is safe and will keep your nasal passages clean, healthy and open.

Nasal Allergies, Dryness & Hay Fever
Sinus Pressure & Nasal Stuffiness
Nasal Symptoms from Flu & Cold
Nasal Irritation from Occupational & House Dust, Fumes, Animal Dander, Grass, Pollen, Smoke, etc.
Post Nasal Drip & Nasal Congestion

Advantages

Soothing, No Burning or Stinging Large Volume & Low Pressure™ System for Saline Nasal Irrigation, Moisturization and Daily Nasal Hygiene
Single piece, custom-designed rounded black cap fits any nasal opening. No push and pull components make for easy cleaning.
Preservative, Drug, Iodine, BPA, Gluten and Latex Free
Premixed Packets of USP Grade Sodium Chloride & Sodium Bicarbonate (Purity level 99% or higher)
Excellent cleansing prior to spraying nasal corticosteroids
pH Balanced & Isotonic, or Hypertonic with two or more packets
Smooth Flow with easy squeeze bottle
Empties nearly 95% in upright position
Suitable for use after sinus surgery and during pregnancy. Consult your physician with concerns.
Portable for travel

Directions

Please read Warning before using. Our recommendation is to replace the bottle every three months.

USE ONLY AS DIRECTED, IF SYMPTOMS PERSIST SEE YOUR DOCTOR/HEALTHCARE PROFESSIONAL. ALWAYS READ THE LABEL.

Step 1 Please wash your hands. Fill the clean bottle with the designated volume of lukewarm distilled, filtered or previously boiled water. You may warm the water in a microwave in increments of 5 to 10 seconds to avoid overheating the water, damaging the device or scalding your nasal passage.
Step 2 Cut the SINUS RINSE™ mixture packet at the corner and pour its contents into the bottle. Tighten the cap and tube on the bottle securely. Place one finger over the tip of the cap and shake the bottle gently to dissolve the mixture.
Step 3 Standing in front of a sink, bend forward to your comfort level and tilt your head down. Keeping your mouth open, without holding your breath, place the cap snugly against your nasal passage. SQUEEZE BOTTLE GENTLY until the solution starts draining from the OPPOSITE nasal passage. Some may drain from your mouth. For a proper rinse, keep squeezing the bottle GENTLY until at least 1/4 to 1/2 (60 mL to 120 mL or 2 to 4 fl oz) of the bottle is used. Do not swallow the solution.
Step 4 Blow your nose very gently, without pinching nose completely to avoid pressure on eardrums.If tolerable, sniff in gently any residual solution remaining in the nasal passage once or twice, because this may clean out the posterior nasopharyngeal area, which is the area at the back of your nasal passage. At times, some solution will reach the back of your throat, so please spit it out.To help drain any residual solution, blow your nose gently while tilting your head forward and to the opposite side of the nasal passage you just rinsed.
Step 5Now repeat steps 3 and 4 for your other nasal passage.
Step 6 Clean the bottle and cap (see directions below). Air dry the SINUS RINSE™ bottle, cap, and tube on a clean paper towel or use NeilMed® NasaDOCK® or NasaDOCK® Plus (sold separately) to store the bottle, cap and tube.

It is very important to keep these devices clean and free from any contamination.Replace the bottle every 3 months.

NeilMed® SINUS RINSE™ Squeeze Bottle: - Please perform routine inspections of the bottle and tube for any discolorations and cracks. If there are any visual signs of deterioration or permanent color changes, please clean thoroughly. If the discolorations remain after cleansing, discard the items and purchase new ones. We strongly suggest that you follow all these steps after each use of the product.

Step 1: Rinse the cap, tube and bottle using running water.
Step 2: Add a few drops of dish washing liquid or baby shampoo.
Step 3: Attach the cap and tube to the bottle; hold your finger over the opening in the cap and shake the bottle vigorously.
Step 4: Squeeze the bottle hard to allow the soapy solution to clean the interior of the tube and the cap. Empty out the bottle completely.
Step 5: Rinse the soap from the bottle, cap and tube thoroughly and place the items on a clean paper towel to dry or use the preferred NasaDOCK® or NasaDOCK Plus.

The NasaDOCK® is a simple, hygienic way to dry and store the SINUS RINSE™ bottle, cap and tube. NasaDOCK® comes with various hanging options and is available in different colors. Our newest model also offers storage for our SINUS RINSE™ mixture packets. We strongly suggest using NasaDOCK® as an inexpensive, easy way to dry the cap, tube and SINUS RINSE™ bottle.

Dishwasher Cleaning: Do not use a dishwasher to clean the inside of a bottle. While our bottle is dishwasher safe, a dishwasher will not adequately clean the SINUS RINSE™ bottle. The water jets in dishwashers cannot enter the narrow neck of the bottle, and portions of the bottle's interior will not be cleaned thoroughly. Additional methods of cleaning the bottle include the use of concentrated white vinegar or isopropyl alcohol (70% concentration), followed by scrubbing and rinsing as described above.

Microwave Disinfection Clean the device with soap and water as mentioned above and shake off the excess water. Now place the bottle, cap and tube in the microwave for 40 seconds. This will disinfect the bottle, cap and tube. If the microwave has been used recently, please make sure that the inside of the microwave has cooled back down to room temperature before using it to disinfect the bottle.

NeilMed Neti Pot Users: Use the same procedure as above.

Maintenance & Storage :Use a microwave periodically to disinfect devices. Always store NeilMed® products in a cool and dry place with adequate ventilation. NasaDOCK® or NasaDOCK Plus offer a simple hygienic way to air dry & neatly store the bottle, cap, tube and NasaFlo.

Do not store the bottle with the cap screwed on, unless both are dry. Do not store the wet parts in a sealed plastic bag. If you travel before they are dry, wrap parts separately in paper towels. Hand soap or shampoo can be used for cleaning parts while away from home.