This pedal also fits Marshall Valvestate VS265, the Marshall JCM 900 4100 4501 (to control Channel Switching & Reverb), The Marshall AS50R (to control Reverb and Chorus), the Marshall JCM 800 4211, Marshall JCM 800 4212, the Marshall JCM 800 model 2210 and 2205 to control Clean/Boost and Reverb, the Marshall Valvestate 8100, Valvestate 8080 (to control Boost and Reverb), Valvestate 40V 8040, Marshall Artist 3202, Marshall 3203, Marshall 5210, Marshall DSL 401, Marshall 250 DFX (to control Clean/Overdrive and to switch DVX On/Off), Valvestate VS 100, Marshall 8200 Bi Chorus head (to control Chanel Switching and Chorus) and similar amps.  For example, with the VS 100 one button will control the Clean/Overdrive and the other button will control Overdrive1/Overdrive2.  With the Marshall JCM2000 DSL401 Head you can use two of our pedals on your amp at the same time: This Double Button pedal will switch between Clean/Overdrive and OD1/OD2 and at the same time, you may also use our Single Button Pedal (available on another auction) to swithch the Reverb On/Off.  This pedal will also work perfectly with the LEE JACKSON XLS-1000 Head, a KRANK REVOLUTION 2 Channel, the Egnator Rebel 30 Head (to control Channel Selection and Reverb On/Off) as well most LANEY amps and many other amps that use a double button footswitch.   For example, this pedal will work perfectly with a Laney AOR50 and Laney AOR100 with reverb.  If you have a Laney AOR50 without reverb, then our single button Marshall Pedal (available on my other eBay auctions) would be correct for your amp. This pedal will control Clean/Drive and Reverb On/Off on a Laney VC 30.

This is the correct footswitch for the Marshall Vintage Modern 2466 to control Dynamic Range and Reverb.

This pedal will control Gain Boost and FX on any of the Marshall Orgin Series of Amps.

This footswitch is the equivalent to the Kustom KAC-FS201 footswitch and will also control both Channel Switching and Effects On/Off in a Kustom 200 head and on a Kustom HV-30 Combo Amp.

This footswitch will also control Channel Switching and Reverb on a LANEY CG60C.  In addition on the LANEY CG60C at the same time you can use an additional pedal.  You can also use our single button Marshall pedal to control Chorus on this LANEY amp.  This pedal also fits a LANEY LX120H amp (be sure that the "Crunch" switch is turned on in the LX120H amp for the footswitch to operate).

This footswitch will also work with a Trace Elliot Tube Amp to control either Reverb/Boost (or Boost/Chorus with a Super Champ) or Channel/Gain depending on which of the two footswitch jacks you use for the footswitch. To further clarify, you can use two pedals at the same time to control all four functions.  Or, if you only need to control two functions, you can use one pedal plugged into either of the two Trace Eliot footswitch jack to control those two functions.  If you are located in the United States, I can lower the total shipping cost of two pedals shipped together.  Simply purchase and pay for the shipping on the two pedals.  I will then send you a partial refund for the lowered cost of shipping both pedals in the same package.

This pedal will also work with an ENGL amp and is the equivalent of the ENGL Z4 footswitch.

This footswitch will also work with most amps that use a  1/4" PHONE jack to control the vibrato, reverb, channel switching, chorus, or any other two functions, as long as there are no other electronics required inside the pedal besides the switches.  This high quality DOUBLE foot switch features two buttons, one for one for each function such as Vibrato, Reverb, Channel Switching, Overdrive, etc. The included 15 foot long cable has a ?" PHONE PLUG to plug right into your Marshall or similar Amp allowing you plenty of room between you and the Amp. This well-constructed and rugged footswitch is MADE FROM HEAVY STEEL, not plastic and will fit most Marshall and similar amps using a phone jack that controls two functions.

Please email me using the "Ask Seller a Question" link above with any questions.

I have had many positive comments from musicians who have purchased this footswitch, and have been very pleased with it.

Here are some examples of the unsolicited comments that I have received about this footswitch:

"This pedal works perfectly on my used Marshall amp I just purchased on eBay.  It is also a very well made pedal.  It does not slide or move around when I am using it.  Thanks very much!." Roscoe W., San Diego, CA

"This pedal is the same as my original Marshall foot switch.  Thanks for the very fast shipping!!"  Richard R., New York, NY

"This footswitch works just great with my Marshall JCM-900 amp.  Thanks for the 2 day shipping!.  I used it in my show this weekend.  Thanks Sandy!."   Lorenzo V., Philadelphia, PA

Feel free to check my feedback and bid with confidence. Please email with any questions before bidding. We accept Visa, MasterCard, Discover and American Express through PayPal.  We reserve the right to reject bids from those with negative or hidden feedback. If you fall into this category, please email before bidding! We also reserve the right to declare this auction null and void if eBay is not accessible during the last three hours of this auction.