Oyaide BR-12 Turntable Mat Rubber Turntable sheet
Description
"MJ-12" while inheriting the shape of, turntable sheet was made of butyl rubber having an excellent vibration absorption.
? In the grip of butyl rubber with a high coefficient of friction, it improves the adhesion of the record board, preventing the slip of the phonograph record. Takabari without a phonograph record to slip even in the cartridge regeneration of pressure, you always stable record playback can be obtained.
Have-gold and the equivalent of a high specific gravity (specific gravity 19), incorporated in the butyl rubber tungsten, which is known as anti-vibration material in place of the lead. Absorption excellent low resilience among the rubber-based material, and butyl rubber having a vibration-absorbing, by the combined action of the tungsten, the unwanted vibration caused to the turntable. To achieve the turbidity no reproduced sound in the clear.
- Has a conical taper of the elevation angle 1.0 ° to the outer periphery from the center, that is brought into close contact the record board to taper, straightening the warp of the phonograph record. The operation of the record needle is stabilized, trace of sound groove will dramatically increase.
? The taper, is provided with a total of 18 tuning hole, eliminating the habit of tend to rubber-based material to the dead. Without impairing the sense of movement, it reduces the only incidental sound surrounding unwanted vibration. Tuning Hall also functions as a finger rest groove to smoothly perform removal 10-inch panel and EP board.
- By providing the round taper for the finger rest on the outer edge of the "BR-12", smoothly you can the removal of the "BR-12" from the record player.
? The outer diameter that was 294mm, it can LP board the removal of the (diameter 300mm) smoothly.
? Many of the record player of that was the same 5mm thick and accessories turntable mat, without performing the adjustment of the height of the tone arm, it can be replaced with the accessories.
Record player handy stroboscope overhang gauge to adjust (made of laminate-coated cardboard) is included.
- Dirty when is washed with water, please wipe off the moisture with a soft cloth.
- Since there is a possibility of changing the nature of the rubber, oil, organic solvents, do not wipe with alcohol.
? In order to contact the record board the tapered surface, we recommend the combination of mass 300g or more records stabilizer.
Appropriate value of the overhang gauge, your record player, please refer to the instruction manual of the tone arm.
? To use the stroboscope, LED light bulb (AC 50Hz / 60Hz), fluorescent light (type not the inverter type), please prepare a strobe light emitter separately.
? In the grip of butyl rubber with a high coefficient of friction, it improves the adhesion of the record board, preventing the slip of the phonograph record. Takabari without a phonograph record to slip even in the cartridge regeneration of pressure, you always stable record playback can be obtained.
Have-gold and the equivalent of a high specific gravity (specific gravity 19), incorporated in the butyl rubber tungsten, which is known as anti-vibration material in place of the lead. Absorption excellent low resilience among the rubber-based material, and butyl rubber having a vibration-absorbing, by the combined action of the tungsten, the unwanted vibration caused to the turntable. To achieve the turbidity no reproduced sound in the clear.
- Has a conical taper of the elevation angle 1.0 ° to the outer periphery from the center, that is brought into close contact the record board to taper, straightening the warp of the phonograph record. The operation of the record needle is stabilized, trace of sound groove will dramatically increase.
? The taper, is provided with a total of 18 tuning hole, eliminating the habit of tend to rubber-based material to the dead. Without impairing the sense of movement, it reduces the only incidental sound surrounding unwanted vibration. Tuning Hall also functions as a finger rest groove to smoothly perform removal 10-inch panel and EP board.
- By providing the round taper for the finger rest on the outer edge of the "BR-12", smoothly you can the removal of the "BR-12" from the record player.
? The outer diameter that was 294mm, it can LP board the removal of the (diameter 300mm) smoothly.
? Many of the record player of that was the same 5mm thick and accessories turntable mat, without performing the adjustment of the height of the tone arm, it can be replaced with the accessories.
Record player handy stroboscope overhang gauge to adjust (made of laminate-coated cardboard) is included.
- Dirty when is washed with water, please wipe off the moisture with a soft cloth.
- Since there is a possibility of changing the nature of the rubber, oil, organic solvents, do not wipe with alcohol.
? In order to contact the record board the tapered surface, we recommend the combination of mass 300g or more records stabilizer.
Appropriate value of the overhang gauge, your record player, please refer to the instruction manual of the tone arm.
? To use the stroboscope, LED light bulb (AC 50Hz / 60Hz), fluorescent light (type not the inverter type), please prepare a strobe light emitter separately.
