A. TOP TUBE LENGTH	21"
B. CHAINSTAY LENGTH	13.25"
C. HEAD ANGLE	75°
D. HEAD TUBE LENGTH	117mm
E. SEAT TUBE ANGLE	70°
F. STANDOVER	8.5"
G. REACH	435mm
H. STACK HEIGHT	366.5mm
I. FORK OFFSET	30mm
K. BB HEIGHT	11.75"

FRAME	SuperKush
FORK	SuperKush Fork
HANDLEBAR	Superkush W750mm X H230mm
GRIPS	Mafiabikes Lucky 6 150mm
STEM	Mafiabikes forged Topload - 50mm Reach
HEADSET	1 1/8” Integrated - Sealed bearings
SADDLE	Mafiabikes 1 Piece mid integrated alloy post - Ø25.4
SEATPOST	Ø25.4mm integrated with seat
SEATCLAMP	Integrated
CRANKS	170mm 4130 chromoly heat treated 19mm 8 spline 3 piece cranks
BOTTOM BRACKET	Sealed Mid - 19mm ID
PEDALS	9/16” Mafiabikes plastic
CHAIN	KMC Single speed 1/2"*1/8"
CHAINRING/SPROCKET FRONT	25t Mafiabikes Gully CNC single speed sprocket 7075
SPROCKET/CASSETTE REAR	9t Semi sealed Cassette
BRAKE FRONT	Side pull cable brake (supplied in roadkit)
BRAKE REAR	BMX U-brake
TYRE FRONT	Lagos Crawler 20" x 2.4"
TYRE REAR	Lagos Crawler 20" x 2.4"
RIM FRONT	20" Double wall alloy 36h
RIM REAR	20" Double wall alloy 36h
HUB FRONT	Alloy shell, 3/8" Female axle, Non Disc
HUB REAR	Alloy shell, 3/8" Female axle, Non Disc

BB TYPE	73mm Mid Sealed (19mm)
HEADSET TYPE	1 1/8” integrated
REAR AXLE/HUB SPACING	3/8" x 110mm Female axle
MAX TIRE WIDTH REAR (WITH 6MM CLEARANCE)	63.5mm / 2.5"
SEATPOST/ SEATCLAMP	Ø25.4mm post, intergrated seatclamp
FRONT AXLE/HUB SPACING	3/8" x 100mm Female axle
MAX TYRE WIDTH FRONT (WITH 6MM CLEARANCE)	63.5mm / 2.5"
FRAME CONSTRUCTION & DETAILS	.4130 Chromoly DT/CS .Tapered SS/CS .Mafia forged SS bridge .Integrated seatcamp
FORK CONSTRUCTION	.4130 Chromoly .Internally threaded steerer .CNC compression cap .Taper blades w/ peg recesses

BIKE WEIGHT  11.8kg (26.0lbs)

Terms of use

Completes & parts

6 months manufacturer?s warranty covers unexpected failure/defect of all parts/components that may not be attributed to fair wear and tear, or crash damage outside that considered normal use. The claimant must be the original owner/purchaser and produce a receipt to prove the date of purchase. The parts/components must be free from modification including shot blasting and/or painting/powder coating where this may be attributed to the failure.

Important - 1 week service

As your bike will have been sent to you via mail order, it is your responsibility to ensure it has been assembled correctly. We allow you to assemble by yourself. However you must get a 1 week service by a qualified bicycle shop technician in order to qualify for your warranty. This is to ensure you have assembled your bicycle correctly and that everything is adjusted correctly e.g. spokes will need tightening, maybe your chain is too loose, brakes not set correctly, tyre pressure incorrect etc. If you do not have your 1 week service record (signed and stamped receipt), then your warranty is invalid.

Examples of items not covered by your warranty:

• worn tyres
• worn/broken chains (unless clearly a manufacturing defect)
• worn sprockets
• worn bearings or hub internals
• bent forks / frame / bars / axles / cranks / pedals
• buckled wheels 
• worn brake cables

Examples of items that are covered where it is clear there has been no abuse or misuse 

(note: you will need to supply photos of both sides of your bike & then may further be asked to return the failed component):

• cracked or broken frames
• cracked or broken forks
• cracked or broken bars
• cracked or broken hubs
• internal axle failure bb/wheels
• visible manufacturing defects to any part or component (should be reported as soon as noticed)

If a repair or replacement is not possible Mafiabikes reserve the right to offer an alternative of equal or greater value (colour may vary) or a partial refund proportional to the remaining life of the product.

You are expected to keep your bike in serviceable condition. any failure attributed to incorrect or lack of maintenance will be easily detected by our engineers & in most cases rejected.

When you make a claim, you will be expected to provide photographic evidence of your complete bike (photos of both sides even if it is a single small component failure) including close up shots of the failed component(s). In most instances you will then be required to send the failed part/component back to our head office for inspection at your own cost.