A quick and easy solution to scan & fit for your Chrysler & Jeep & Dodge Vehicles

All In One Car Diagnostic Scanner FOXWELL NT510 Elite

FOXWELL NT510 Elite is mainly developed for car owners, enthusiasts, small garages, independent repairs and technicians, which provides OE-level diagnosis on all the electronic systems. It does not only include basic functions such as codes and live data, but also is capable of advanced functions such as actuation, adaptation and programming. In addition, it lets you to access the most commonly required service features such as oil service light reset, throttle body adjustment and much more.

1. Works on some latest 2018 models. (More car diagnostic software is being continuously updated)
2. Reads and clears diagnostic trouble codes and resets MIL of all systems.
3. Shows live sensors data and provides data graphing.
4. Merges PID graphs for easy and intuitive diagnosis.
5. Displays freeze frame data.
6. Retrieves ECU information.
7. Runs component/system bi-directional tests.
8. Supports the most commonly required service features like brake deactivation, service reset, steering calibration, ABS bleeding, BCM/SIR setup, TPS/TBA(Throttle Body Alignment),ect..
9. Multi-language menus and code definitions.
10. Ergonomic design and ruggedly built for both shop and road tests.

All In One , Meet your Need !

Diagnostic Tool fits for Your Chrysler, Dodge and Jeep

Providing fast and easy scanning for all systems, the code readers & scan tools is capable of reading and clearing codes, retrieving ECU information and viewing live data for all electronic control modules,which mainly consist of the following Drive System, Chassis System, Body System, Electrical system.

1. Drive system: Engine, Transmission, Battery Energy, All wheel, Transfer case, Electrical Machine Electronics, Diesel Fuel Pump, Gear, and more...

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...

3. BCM(Body System): SRS/Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...

4. Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system...

Warm Tips: Please note, the supported car system will vary from specific year and model.

Solve Your Car Trouble with FOXWELL NT510 Elite OBD2 Scanner !

Maintain Your Car !

• Oil service reset is an indispensable step for car maintenance. The driven mileage or the travel time should be reset to zero after the car maintenance completed, so that the maintenance lamp can be off, while the system will apply a new maintenance cycle.
• A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine, which provides the ECU with information on whether the throttle is in the idle position, wide-open throttle (WOT) position, or somewhere in between these extremes. After the throttle is cleaned, the throttle opening needs to be re-adjusted, while the FOXWELL NT510 Elite will perform the throttle adaptation for some car models.
• Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.
• Tire Pressure Monitoring System (TPMS) Programming: Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires sensors are replaced or rotated.
• Airbag (SRS) / Antilock Brake System (ABS) Service: Allows you to use the scanner temporarily to activate or control anti-lock brake system, airbags or components.
• Steering Angle Sensor (SAS) Calibration: Allows you to perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After calibrate sensor successfully, its fault memory will be automatically cleared.
• Brake bleeding is the procedure performed on hydraulic brake systems whereby the brake lines are purged of any air bubbles. It can be used for brake flushing or purging, where the old brake fluid is replaced with new brake fluid, which a necessary maintenance for cars.
• BTR, Battery Registration: lets you to new battery validated, how to clear faults from the dashboard and display. Note :
• Injector Coding: reset and match the date after injector is replaced.

Full OBDII Scanner

FOXWELL NT510 elite diagnostic scanner fits for Chrysler supports 10 OBDII diagnosis service models. The obd2 diagnosis service can be supported on all cars that compliant with OBD2 protocols. Read codes, clear codes, live data, I/M Readiness,etc.

• Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL)
• Displays Freeze Frame data
• Display I/M readiness status. (Non-continuously Monitored Systems test )
• Show Live Data in graph such as engine RPM, temperatures, ignition advance, speed & etc.
• Request On-Board Monitoring test results for specific monitored systems
• Built-in DTC lookup library with cause analysis
• Request Vehicle Information
• Checking system status & DTC Lookup
• Component test & Modules present

1.How to get it start?

Simply plug into the OBD II port on your car and turn ignition on and you ready to go. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.

2.Is it just can be used fit for Chrysler Jeep Dodge Vehicles?

Full system full diagnose fits for Chrysler Jeep Dodge and OBD2 functions can also be available for other vehicles.

3.Is FOXWELL NT510 Elite a Bi-directional Scan Tool?

Bi-directional Test: NT510 allows you to use the scan tool temporarily activate or control a vehicle system or component. With this diagnostic tool, the check of electronic components such as switches, sensors, relays, and actuators becomes a simple task. It allows you to re-calibrate, adapt or configure certain components after making repairs or replacement, which included but not limited to battery registration, CAS reset, CO adjustment, transport model eletion, disable/enable key.

4. What if i want to diagnose other brand vehicles? Should i to buy another new one?

Of cause not. Besides fit for Chrysler Jeep Dodge, there are also for BMW, Land Rover, Jaguar, Porsche, Ford, VAG, GM, Kia, Hyundai, Opel, and Vauxhall software for your choice. Just need to pay 60 -80 dollars for one more brand.