SOMETHING COOL ABOUT BORIDE T2 SHARPENING STONE:          

FeedBaсk

from the previous Buyer:  leopear_43 (347) US $60.56

  • These are a lot nicer than I thought they would be! Naturally I'm all excited about the new diamond and CBN abrasives lately.... But it makes sense to try different stuff. These seem very promising. Dense thick layer of abrasive, it seems flat enough to just use directly. Very cutting, I think a good balance between cutting and a decent finish. This is actually a familiar industrial product. Distinctive blue color and logo. Packed solidly, with enough padding. Yay!

BORIDE T2 F220 Sharpening stones 6x1x1/4" for Edge Pro, TSPROF, Ruixin, Kazak. (# 353728080088)

FeedBaсk

from the previous Buyer:   birke.joh  (403) US $18.33

  • PRODUCT MUCH BETTER THAN I IMAGINED. EXCELLENT QUALITY AND SIZE, WILL BE GREAT FOR MAINTAINING THE KNIVES I USE THE MOST. SERVICE ALSO FANTASTIC (SHIPPING/DELIVERY). I HIGHLY RECOMMEND THE SELLER AND THE PRODUCTS OFFERED.

BORIDET2 F400 Sharpening stones 6x1x1/4" for Edge Pro Sharpeners F400 (# 353728088125)

FeedBaсk

from the previous Buyer:   dakswaby (131) US $26.25

  • Great deal and fast shipping.

BORIDET2 F1000 Sharpening stones 6x1x1/4" for Edge Pro Sharpeners F1000 (#353728090261)

FeedBaсk

from the previous Buyer:   dakswaby (131) US $20.69

  • Great deal and fast shipping

BORIDET2 F600 Sharpening stones 6x1x1/4" for Edge Pro Sharpeners F600 (#353728088357)

 

WE’RE SELL ONE OF THE BORIDE T2 Sharpening stones 6x1x1/4"for Edge Pro, TSPRF, KAZAK, Hapstone, Ruixin, etc Sharpeners.

Boride Abrasives T2 stones for Apex Edge Pro, TSPROF, KAZAK, Ruixin, Hapstone, etc.

Stones are152*25*6 mm (6*1*1/4”) size.

Twice the thickness of the original Apex Edge Pro stones!!!

Can be used with oil or water.

This "blue" colored, medium hard, aluminum oxide product is treated with a special resin compound for maximum performance.

High 'dish' resistance.



Available in 8 grit sizes (FEPA-F) - 
T2 F150 (Abrasive particle size in microns - 80μm.)
T2 F220 (Abrasive particle size in microns - 50μm.)
T2 F320 (Abrasive particle size in microns - 30μm.)
T2 F400 (Abrasive particle size in microns - 18μm.)
T2 F600 (Abrasive particle size in microns - 10μm.)
T2 F800 (Abrasive particle size in microns - 6.5μm.)
T2 F1000 (Abrasive particle size in microns - 4.5μm.)
T2 F1200 (Abrasive particle size in microns - 3μm.)

Stones are 'ready to use' - flattened and lapped.
Each stone is mounted on aluminum plate to fit Edge Pro sharpener.

 

T2 Boride for Apex Edge Pro, TSPROF, KAZAK, Ruixin, etc.


Condition is "New". Shipped with USPS First Class and Worldwide by

eBay International Standard Delivery



  • For Apex Edge Pro, TSPROF, KAZAK, Ruixin, etc. T2 Boride TSPROF Grit Kit (6pcs) - Condition is "New".
  • Factory pasted and mounted (Beware of fakes - The Boride factory recommendations are 0.125”- inch aluminum blanks. The 3 mm blanks used in Russia and Europe are insufficient to protect the abrasive bars from deflection!) on the aluminum blanks THK - 0.125" that protect your abrasive stones by cracks - Ъ!
  • Boride is a famous as the brand on the abrasive market, that offers professional sharpening stones of different sizes and materials.

            In case of using the water as lubricant, soak the stone in water for 1-2 minutes. In case of using the oil, put a small amount (1-2 drops) of honing oil on the stone’s surface and spread it evenly over the stone with a finger. If the stone absorbs the honing oil, use largemouth of oil.

                     The Boride Corp as the Manufacturer says that stones may have the following minor defects (Please, don't complain and blame me, guys):

·            Saw strokes on the work surface

·            Residues of lacquer

·            Small chips at the corners and along the edges (no larger than 1 mm)

 

All these defects will be eliminated during preparation of the stone for work. Most sharpening stones requires preparation, and Boride stones are no exception. You may to lapping the stones for improve sharpening quality, but this recommendation for professional ONLY – for a kitchen knife you may start to work WHEN it comes from Boride Corp. Boride Corp recommend using loose silicon carbide powder or diamond lapping plate for preparation of the stone for work.