Truly PVC Limited - Conservatory, Window, Door and Roof Parts
Description

Klober Contract Dry Verge

(Choice of product, colour and pack size)

Lower cost unit for big project savings!

How to get the correct side dry verge unit

Tough polypropylene plastic dry verge units for securing concrete interlocking verge tiles without mortar, quickly and easily. Just hook, clip, and slide to fit, then nail. Suitable for new or old roofs, with minimum pitch of 12.5°, and batten gauge of 260-350mm.

Features & Benefits

  • Quick and easy fitting - just hook, clip, slide and nail
  • Resistance to tile uplift - holds tiles firmly, even in strong winds
  • Weatherproof and maintenance free - years of mortar free protection
  • Mortar-free system - not affected by expansion/contraction
  • Highly compatible - use with interlocking concrete tile
  • Variable batten gauge - suitable for 260-350mm gauge
  • Improved weatherproofing - drip ridge keeps water away from gable
  • British Standard compliant - meets regulations including BS 8612

Size of Klober Contract Dry Verge units

Contract Dry Verge Units are compatible with Klober's Uni-Ridge Half Round End Cap (KR9772), Universal Angle End Cap (KR9773), Eave Ridge Pack (KR9733) and Batten End Clips (KR977100).

What You Get

In this listing you can buy...

Left-hand Klober Contract Dry Verge Units

Dry Verge Units (Left)

Tough polypropylene plastic dry verge units for left verge (right side of gable).

Right-hand Klober Contract Dry Verge Units

Dry Verge Units (Right)

Easy to fit interlocking dry verge units for right verge (left side of gable).

Domed Half-Round Klober Dry Verge Apex Ridge End Cap

Apex End (Domed)

Tough dome-topped plastic ridge end for half-round concrete ridge tile.

Univeral Angle Klober Dry Verge Apex Ridge End Cap

Apex End (Angled)

Polypropylene roof ridge end cap for angled or round concrete ridge tiles.

Klober Dry Verge Eaves Ridge Starter Pack

Eaves Ridge Pack (Left/Right)

Two eaves closures, and two ridge closures for finishing one full gable end.

Technical Information

Technical Information

MeasurementValue
UsagePiched roof with concrete interlocking tile
Batten Spacing260-350mm
Pitch12.5° to 90°
Dry Verge Unit Size (l x w x d)397mm x 139mm x 59mm
Domed Apex End Size (w x h x t)270mm x 244mm x 58mm
Angled Apex End Size (w x h x t)270mm x 244mm x 58mm
MaterialPolypropylene
ColourGrey or Brown
CertificationComplies to BS 5534 and BS 8612 for cold and warm roof application
Guarantee10 years
Fitting and Usage

Fitting Klober Contract Dry Verge

The following provides a summary of the recommended steps for typical instillation of the Klober Contract Dry Verge system.

  • Prepare verge by removing any old mortar between the tiles and undercloak.
  • Tile battens should extend 30mm beyond gable wall or bargeboard, or 20mm if using Batten End Clips.
  • Fit Eaves Closure to provide fixing point for first verge unit.
  • Fit subsequent units (one per roof tile) towards the ridge. 1) Hooking under to engage with previous. 2) Click it over top of previous. 3) Slide up into position - inline with roof tile) 4. Nail to batten or batten end clip
  • Insert Ridge Closure into last unit.
  • The combs of the left and right Ridge Closure should interlock at the apex.
  • Screw the Ridge End Cap to the ridge batten.

* We recommend 3.25mm ring shank nails of at least 40mm in length.

Fitting Klober Contract Dry Verge units