The Trim-Gard 3000 Series is a 7/16” wide Colored Wheel Well Molding

This molding is a decorative trim that is primarily used as Wheel Well and Edge Trim on vehicles, furniture, and interior design projects. It comes with a 3M Acrylic Foam Tape for easy, quick installation.

Has a Tear-Drop Shape that looks great as Trim on Vehicles and Furniture

There is a color chart for reference for the colors. However, if you are not sure what color suits your vehicle best MESSAGE US with your cars Year, Make, and Paint Code and we will find the perfect match for you!

If looking for a different Size or style of molding-- Message us and we can point you to the correct product!

*PLEASE FOLLOW INSTALLATION INSTRUCTIONS*

Installation Instructions: Do not stretch molding while installing. 1. Temperature of installation surface area and moldings must be at least 20°C (70°F). 2. Always cut moldings from the chrome side downward. 3. To cut, use anvil type shears (Ronan blade cutter is ideal). 4. Clean area thoroughly with a non-oily general purpose wax and grease remover – 3M general purpose cleaner followed by isopropyl alcohol is preferred. 5. Do not touch or contaminate adhesive once liner is removed. 6. Apply moldings on a flat surface only – not on a ridge. 

Application: 1. Apply a masking tape guide line to the area molding will be applied. Do not apply masking to a freshly painted surface. 2. Clean area above masking tape guide using a general purpose cleaner followed by isopropyl alcohol. Use a clean lint free cloth. 3. Remove 8”-10” of adhesive protective liner at a time and apply molding using a rolling motion. Check molding clearance with all doors by opening each carefully. Once the molding is fixed to the car it should not be removed. 4. Using firm pressure (20-30lbs) rub molding in place with a molding roller (preferred) or a cloth to pressurize adhesive and ensure a maximum bond. Press hard with a blunt object on all ends to ensure permanent adhesion. Do not expose to heat above 93°C (200°F). Chrome moldings feature a permanent, clear PVC top coating that protects the bright finish from weathering. To ensure maximum molding life and to validate warranty, all cut ends must be sealed with a clear acrylic end sealer.