Mafiabikes Bomma 29 Wheelie Bike - Available in multiple colourways


Click here to check out our shop for all Mafia Wheelie bike models and colourways!     


The rapid emergence of the pedal Bikelife culture has created a new and exciting freestyle niche for the streets. With our history in quality BMX and fixed gear bikes, it was inevitable that we would end-up at the forefront of the scene, designing some of the most exciting and affordable wheelie-specific bikes money can buy! BOMMA is a fresh design, with a focus strictly on all-round wheelie tricks.

Designed to have a large balance-point range for stable wheelies and combo tricks, it sits quickly and effortlessly on the rear wheel ready for whatever you want to throw at it.

Because we know your brake is seriously important, BOMMA comes with a hydraulic rear disk brake installed. Retro fat looks, crazy colourways, hi spec and ultimately created by engineers and designers (who ride wheelie bikes) to give you the ultimate riding experience… why would you pay more for a lot less??

The Bomma now comes kitted out with the all new Lagos Snakeskin 2 tyre. We have Refined and tweaked the snakeskin design to make the Snakeskin 2 the best wheelie specific tyre on the market.

  • Thicker material throughout the body of the tyre to aide with puncture resistance.
  • Deeper tread for a longer lasting tyre
  • Softer compound and a more aggressive knurl for more grip when you need it
  • Wider profile

NOTE* If you are looking for a flickable bike, with a tight balance point that swerves faster than any other bike on the market, please see our Medusa.



GEOMETRY

A. TOP TUBE LENGTH

605mm

 

B. CHAINSTAY LENGTH

454mm

C. HEAD ANGLE

70°

D. HEAD TUBE LENGTH

105mm

E. SEAT TUBE ANGLE

71° 

F. STANDOVER

773mm

G. REACH

439mm

J. BB DROP

65mm




SPECS

FRAME

Bomma 29

FORK

Bomma 29 Fork

HANDLEBAR

Roadman 4 Piece W762mm X H152mm  

GRIPS

Mafiabikes Lucky 6 150mm 

STEM

Mafiabikes forged Topload - 50mm Reach

HEADSET

1 1/8” External - Unsealed bearings

SADDLE

Mafiabikes Wheelie seat - Railed 

SEATPOST

Ø25.4mm micro adjust alloy

SEATCLAMP

Ø28.6mm External

CRANKS

170mm 4130 chromoly heat treated 19mm 8 spline 3 piece cranks

BOTTOM BRACKET

Sealed Mid - 19mm ID

PEDALS

9/16” Mafiabikes plastic

CHAIN

KMC Single speed 1/2"*1/8"

CHAINRING/SPROCKET FRONT

25t Mafiabikes Steel Sprocket

SPROCKET/CASSETTE REAR

12t Fully sealed Cassette

BRAKE FRONT

Side pull cable brake (supplied in roadkit) 

BRAKE REAR

Zoom - hydraulic disc brake 160mm rotor

TYRE FRONT

Lagos Snakeskin 2 29” x 2.5” 

TYRE REAR

Lagos Snakeskin 2 29” x 2.5” 

RIM FRONT

29" 35mm Wide double wall alloy 36h

RIM REAR

29" 35mm Wide double wall alloy 36h

HUB FRONT

Alloy shell, Fully sealed bearings, 3/8" axle

HUB REAR

Alloy shell, 3/8" axle, Fully sealed bearings, Disc



TECH

BB TYPE

73mm Mid Sealed (19mm) 

HEADSET TYPE

1 1/8” external 

REAR AXLE/HUB SPACING

3/8" x 135mm axle

MAX TIRE WIDTH REAR

(WITH 6MM CLEARANCE)

66mm / 2.6"

SEATPOST/ SEATCLAMP

Ø25.4mm post Ø28.6 seatclamp

FRONT AXLE/HUB SPACING

3/8" x 100mm axle

MAX TYRE WIDTH FRONT

(WITH 6MM CLEARANCE)

66mm / 2.6"

ISCG MOUNT

none


FRAME

CONSTRUCTION

& DETAILS


.Hi Tensile
.TT/DT gussets
.External seatclamp
.IS Disc mount


FORK

CONSTRUCTION


.Hi tensile
.Taper Blade
.Thread-less steerer tube w/star nut 

BIKE WEIGHT  15.5Kg (34lbs)


Terms of use

Warranty claims will only be handled through the appropriate channel which is our online form. If you do not supply all of the requested information, your claim may be rejected. Please go to stomp-group.com 


Completes & parts

6 months manufacturer?s warranty covers unexpected failure/defect of all parts/components that may not be attributed to fair wear and tear, or crash damage outside that considered normal use. The claimant must be the original owner/purchaser and produce a receipt to prove the date of purchase. The parts/components must be free from modification including shot blasting and/or painting/powder coating where this may be attributed to the failure.


Important - 1 week service

As your bike will have been sent to you via mail order, it is your responsibility to ensure it has been assembled correctly. We allow you to assemble by yourself. However you must get a 1 week service by a qualified bicycle shop technician in order to qualify for your warranty. This is to ensure you have assembled your bicycle correctly and that everything is adjusted correctly e.g. spokes will need tightening, maybe your chain is too loose, brakes not set correctly, tyre pressure incorrect etc. If you do not have your 1 week service record (signed and stamped receipt), then your warranty is invalid.


Examples of items not covered by your warranty:


  • worn tyres
  • worn/broken chains (unless clearly a manufacturing defect)
  • worn sprockets
  • worn bearings or hub internals
  • bent forks / frame / bars / axles / cranks / pedals
  • buckled wheels 
  • worn brake cables


Examples of items that are covered where it is clear there has been no abuse or misuse 

(note: you will need to supply photos of both sides of your bike & then may further be asked to return the failed component):

  • cracked or broken frames
  • cracked or broken forks
  • cracked or broken bars
  • cracked or broken hubs
  • internal axle failure bb/wheels
  • visible manufacturing defects to any part or component (should be reported as soon as noticed)

If a repair or replacement is not possible Mafiabikes reserve the right to offer an alternative of equal or greater value (colour may vary) or a partial refund proportional to the remaining life of the product.

You are expected to keep your bike in serviceable condition. any failure attributed to incorrect or lack of maintenance will be easily detected by our engineers & in most cases rejected.

When you make a claim, you will be expected to provide photographic evidence of your complete bike (photos of both sides even if it is a single small component failure) including close up shots of the failed component(s). In most instances you will then be required to send the failed part/component back to our head office for inspection at your own cost. 

Returns
We accept returns for up to 30 days should you decide you do not want your item & it must be returned unopened, fitted or used in any original packaging. We must be informed of damaged items immediately. If there is damage to any returned parts in transit or if the value of item has been reduced as a result of over handling (for example more than you would in a shop) you may be liable for a deduction in the refund to cover our costs. Please ensure you package it well & send it back recorded delivery.