ESP-32 ESP-WROOM-32
Description:
ESP-WROOM-32 is Powered by Espressif’s most advanced SoC, the ESP-WROOM-32 features high performance, a wide range of peripherals, Wi-Fi and Bluetooth radio, which provide a complete solution tailored to advanced IoT applications.
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
16 MByte flash
2.2V to 3.6V operating voltage
-40°C to +125°C operating temperature
On-board PCB antenna / IPEX connector for external antenna
Supports sniffer, station, softAP and Wi-Fi direct modes
Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b
Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
Minimum receiver sensitivity of -98 dBm
135 Mbps UDP sustained throughput
2.5 µA deep sleep current
ESP-32 Dev Board Bluetooth WiFi
Introduction:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
Features:
High performance-price ratio
Small volume, easily embeded to other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting Lua program, easily to develop
Package included:
1 x ESP32 Development Board
ESP-32 FOR WEMOS LOLIN32
Feature：
WIFI
bluetooth
4 MB Flash
Lithium battery interface(battery not include), 500mA Max charging current.
Package Include:
1 x 16pin
1 x 20pin
1 x WEMOS LOLIN32
ESP-32 WiFi Bluetooth for D1
Wemos MINI D1 ESP32 ESP-32S WIFI + Bluetooth ESP8266 Module CP2104 For Arduino
Shipping list:
- Long female pins x4pcs
- short female pinsx4pcs
3.Normal pinsx4pcs
- mini D1 ESP32 blue x1pcs
ESP-32 Nodemcu Dev Board
AIR V6 Features:
- Product used CP2104 super stable USB as serial program, not CH340 and PL2303 again.
- Support automatic download, no need to manually switch download and run mode, no matter for Mac, linux, win system,
is a make flash download firmware.
- Immersion gold process, white solder mask, black ultra-fine silk screen.
- Support macOS, Windows (need cygwin simulation environment), Linux system development.
- Compatible with ESP-WROOM, NODEMCU, Arduino
- Support lithium battery interface, the default charge current is set to 333mA.
- Because Le Xin official SD card sample program occupies GPIO2, resulting in the use of SD card routines will appear unable to download the program, AIR V6 has done for this situation has been fixed.
- Size size is 61.6 * 17.78mm, very small and cute, direct insert package board, both sides can also stay 5 rows of holes.
Package included:
1 x Widora-AIR AI+RISC ESP32 Module
ESP-32 WiFi Board for WEMOS
Products Description:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
When you do some ESP32projects you must add a power bank to provide the power. This tiny board could solve such problems. A LG 3000mAH 18650 battery (NOT include) could make ESP32 run 17 hours or more.
Products Feature:
18650 charging system integrated.
indicate LED inside(Green means full& Red means charging)
Charging and working could be at the same time.
1 Switch could control the power.
1 extra LED could be programmed(Connected with GPIO16[D0])
0.5A charging current
1A output
Over charge protection
Over discharge protection
Full ESP32 pins break out
Highlights:
High performance-price ratio
Small volume, easily embeded to other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting Lua program, easily to develop
Note: This product does not include 18650 battery
ESP-32 ESP-WROOM-32 OLED
Description:
ESP32 has integrated antenna and RF Barron, power amplifier, low noise amplifier, filter and supply Management module. The entire solution is the smallest PCB area. The board is 2.4 GHz dual-mode Wi-Fi and Bluetooth low power technology, with a wide range of safe, reliable and scalable applications for the TSMC 40nm chips, power and best RF features.
Features:
high-performance price ratio, small size, easy embedding to other products powerful, with the support of the LwIP protocol, support three modes: using AP, STA and AP and STA LUA program support, easy to develo
