Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

This interface connects a KENWOOD stereo with an input (on the back of the unit) to the existing dynamicsounds00 Stalk/steering wheel controls of the vehicle.

Compatible with following vehicles:

Car Make / Model	Year	Remarks
VW Polo	2001 - 2005	(9N), Audio 20
VW Beetle	1998 - 2010
VW Bora	1998 - 2005	A4
VW Golf	1998 - 2003	(MK4, 1J)
VW Lupo	1998 - 2005	6E
VW Passat	1996 - 2005	(3B, 3BG)
VW Sharan	2000 - 2005
VW Transporter	1990 - 2003	T4

Connection: Mini ISO

Headunit: Gamma/Beta/MFD/MCD

IMPORTANT NOTES:

If you have a dashboard mounted audio display then this will not work once the new stereo is fitted but your clock and temperature will remain.  

SWC.2 Interfaces C2 Programming tool (C2 RE Flasher) and Programming leads (PROG LEAD 1) are sold separately.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.