Solar system 260 watts 12 volts
For garden, camping, RV, boats
This system is ideal for supplying gardens, campgrounds, camping, boats, RVs, weekend homes or even your home. Basic set for setting up an independent solar power system. This system was put together by us in such a way that there is only a minimum of installation effort for the installation.
To store the electricity generated, you need a 12V battery storage (accumulator). This set is suitable for charging lead-acid, gel and AGM batteries (batteries).
All components are pre-assembled and only have to be plugged together according to the enclosed connection diagram! And off we go with our own electricity...
Scope of delivery:
Technical description of the components:
solar panel
TÜV tested and certified quality module
The solartronics 05130M0113 solar module is a universal module with modern 5-busbar technology and high-quality mono solar cells. Our 130 W solar module is suitable for stand-alone systems in terms of design and performance data.
Advantages:
Technical data per module:
The black protective edges are an additional service from us to protect your module corners during transport. These corners can be removed before installing the modules.
voltage converter
With this device you can generate 230 V AC voltage from 12 V DC voltage (e.g. from car batteries, truck batteries or batteries from solar island systems) and thus operate many household appliances with 230 V nominal voltage.
Scope of delivery: converter, connection cable DC approx. 60 cm, instruction manual incl. Circuit diagram
Advantages:
Details:
charge controller
The charge controller is connected between the solar modules and the battery and is therefore responsible for controlling the charging process, so the battery can always be charged to the maximum. The battery is gently charged by a built-in microprocessor, thus guaranteeing your battery a long service life.
All voltages, charging processes and parameters can be shown on the display. You can set the end-of-charge voltage via the control panel, so the solar charge controller can be used on any battery. It can be set from which voltage the undervoltage protection should be activated and from which operating voltage the undervoltage protection should be reset.
Overcharging of the battery can be prevented because the charge controller ends the charging process and switches to trickle charging when the set end-of-charge voltage is reached.
Advantages:
Details:
A total of two 130 watt modules can be connected to the 20 A charge controller.
The supplied cable sets are configured and checked by our employees. They contain the necessary connections (solar plugs, battery clamps or ferrules). TÜV-tested solar cables from German production are used.
This is a monocrystalline solar module from solartronics with an output of 2x130 watts. The surface consists of hardened glass, well protected against Allen weather conditions. The frame is made of aluminum, the junction box on the back is weatherproof.
Our solar modules are TÜV tested and have the corresponding certificate.
Monocrystalline solar cells are manufactured from the semiconductor material silicon in a complex process. Compared to polycrystalline solar cells, they have a very high silicon content, are highly efficient and are the most effective solar modules in direct sunlight.
Monocrystalline solar cells are therefore very well suited if only a small area is available for a photovoltaic system, if a very high output is to be achieved in direct sunlight or if the area is oriented directly to the south.
Solar power can be used in many ways. Whether as a large-scale system for economical grid feed-in on single or multi-family houses or self-sufficient stand-alone systems without a grid connection. On mobile homes, boats, small gardens or small houses of all kinds. However, a battery is required for this.
Monocrystalline solar cells from solartronics can be optimally used for all of these areas of application.
After the auction you will automatically receive an e-mail to the e-mail address stored on eBay to initiate the purchase process. In the purchase process, you can combine several auctions from us and save on shipping costs, adjust your billing and delivery address and choose the payment method and shipping method. You will also find all the information on payment processing there, such as our account details and intended use in the case of prepayment / bank transfer. If you do not receive this email within 2 hours, please contact us.